3395592 CYLINDER GP-TILT Caterpillar parts
924K
Rating:
Alternative (cross code) number:
CA3395592
339-5592
3395592
CA3395592
339-5592
3395592
Weight: 210 pounds 95 kg.
WHEEL LOADER,
Compatible equipment models: 3395592:
For full view, you need register
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 9S-9082 Engine Turning Tool 1 Start By:
Remove the cylinder head. Refer to Disassembly and Assembly, "Cylinder Head - Remove".
Remove the engine oil pump. Refer to Disassembly and Assembly, "Engine Oil Pump - Remove".
Remove the piston cooling jets. Refer to Disassembly and Assembly, "Piston Cooling Jets - Remove and Install".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00998389
Use Tooling (A) to rotate the crankshaft until the piston is at the bottom center.
Remove the carbon ridge from the top inside surface of the cylinder liner.
Inspect the connecting rod and connecting rod cap for the proper identification mark. The connecting rod and the connecting rod cap should have an etched number on the side. The number should match the cylinder number. Mark the connecting rod and the connecting rod cap, if necessary. Note: Do not stamp the connecting rod assembly. Stamping or punching the connecting rod assembly could cause the connecting rod to fracture.
Remove bolts (1) and connecting rod bearing cap (2). Push the connecting rod until the piston rings are out of the cylinder liner.
Illustration 2 g00998390
Remove piston (3) and the connecting rod from the cylinder liner. Note: Be careful not to damage the cylinder liner or the crankshaft journal during the removal of the piston and the connecting rod.
Table 1
Required Tools
Tool Part Number Part Description Qty
A 9S-9082 Engine Turning Tool 1 Start By:
Remove the cylinder head. Refer to Disassembly and Assembly, "Cylinder Head - Remove".
Remove the engine oil pump. Refer to Disassembly and Assembly, "Engine Oil Pump - Remove".
Remove the piston cooling jets. Refer to Disassembly and Assembly, "Piston Cooling Jets - Remove and Install".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00998389
Use Tooling (A) to rotate the crankshaft until the piston is at the bottom center.
Remove the carbon ridge from the top inside surface of the cylinder liner.
Inspect the connecting rod and connecting rod cap for the proper identification mark. The connecting rod and the connecting rod cap should have an etched number on the side. The number should match the cylinder number. Mark the connecting rod and the connecting rod cap, if necessary. Note: Do not stamp the connecting rod assembly. Stamping or punching the connecting rod assembly could cause the connecting rod to fracture.
Remove bolts (1) and connecting rod bearing cap (2). Push the connecting rod until the piston rings are out of the cylinder liner.
Illustration 2 g00998390
Remove piston (3) and the connecting rod from the cylinder liner. Note: Be careful not to damage the cylinder liner or the crankshaft journal during the removal of the piston and the connecting rod.
Parts cylinder Caterpillar catalog:
120M 2, 2384C, 2484C, 2670C, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 323E L, 324E, 324E L, 324E LN, 329E, 329E L, 329E LN, 559C, 573C, 579C, 924K, 930K, 938K, 950K, 962K, BG1000E, BG1055E, C4.4, C6....
3750724
CYLINDER GP-COUPLER
416F, 420F, 430F, 924H, 924K, 928HZ, 930K, 938K
416F, 420F, 430F, 924H, 924K, 928HZ, 930K, 938K
3737241
CYLINDER HEAD GP
120M 2, 2384C, 2484C, 2570C, 2670C, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 323E L, 329E, 329E L, 329E LN, 559C, 563C, 573C, 579C, 924K, 930K, 938K, 950K, 962K, BG1000E, BG1055E, C6.6, C7.1
120M 2, 2384C, 2484C, 2570C, 2670C, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 323E L, 329E, 329E L, 329E LN, 559C, 563C, 573C, 579C, 924K, 930K, 938K, 950K, 962K, BG1000E, BG1055E, C6.6, C7.1
3395595
CYLINDER GP-STEERING
924K, 930K
924K, 930K
2054846
CYLINDER GP-BUCKET
924G, 924H, 924K, 928HZ, 930G, 930K, 938K
924G, 924H, 924K, 928HZ, 930G, 930K, 938K
416C, 416D, 420D, 426C, 430D, 436C, 769D, 770, 770G, 770G OEM, 771D, 772, 772G, 772G OEM, 773D, 773E, 773F, 773G, 773G LRC, 773G OEM, 775D, 775E, 775F, 775G, 775G LRC, 775G OEM, 784C, 785C, 785D, 834K...
3240496
CYLINDER HEAD AS
422E, 422F, 428E, 428F, 432E, 432F, 434E, 434F, 442E, 444E, 444F, 924K, 930K
422E, 422F, 428E, 428F, 432E, 432F, 434E, 434F, 442E, 444E, 444F, 924K, 930K
3240382
CYLINDER HEAD AS
432F, 442E, 444E, 444F, 613G, 924K, 938K
432F, 442E, 444E, 444F, 613G, 924K, 938K
120M 2, 725, 730, 924K, 930K, 938K, 963D, 973C, 973D, D6K2 LGP, D6N, D6N LGP, D6N OEM
1925897
CYLINDER GP-COUPLER
924K, 930K, 938G, 938H, 938K, 950G II, 950H, 950K, 962G II, 962H, 962K, 966G, 966G II, 966H, 972G, 972G II, 972H, 973C, SW2003/6, SW2109
924K, 930K, 938G, 938H, 938K, 950G II, 950H, 950K, 962G II, 962H, 962K, 966G, 966G II, 966H, 972G, 972G II, 972H, 973C, SW2003/6, SW2109
365B, 365B II, 735, 735B, 740, 740B, 776D, 777D, 777F, 777G, 834K, 836K, 844, 924K, 930K, 938K, 950 GC, 950H, 962H, 963D, 973D, 986H, 990, 990 II, 993K, D10T, D10T2, D11T, D350E II, D400E II, D6T, D6T...
1007844
CYLINDER GP-TILT
446B, 446D, 450E
446B, 446D, 450E
3408946
CYLINDER & LINES GP-STICK
324E L, 324E LN
324E L, 324E LN
8W2888
CYLINDER & MTG GP-BLADE TIP
120G, 12G, 130G, 140G, 160G
120G, 12G, 130G, 140G, 160G
3588436
CYLINDER & LINES GP-BOOM
349E, 349E L, 349E L HVG, 349E L VG, 349F L
349E, 349E L, 349E L HVG, 349E L VG, 349F L
3Q8416
CYLINDER GP-LIFT
120H, 12H NA, 140H NA
120H, 12H NA, 140H NA
8X7220
CYLINDER GP-AIR/HYDRAULIC
768C, 769C, 769D, 771C, 771D, 772B, 773B, 773D, 775B, 775D, 776C, 784B, 784C, 785, 785B, 785C, 785D, 793, 793B, 793C, 793D, D40D
768C, 769C, 769D, 771C, 771D, 772B, 773B, 773D, 775B, 775D, 776C, 784B, 784C, 785, 785B, 785C, 785D, 793, 793B, 793C, 793D, D40D
9C3790
CYLINDER & MTG GP-STEERING
918F, 924F, IT18F, IT24F
918F, 924F, IT18F, IT24F