CYLINDER & LINES GP-BUCKET 3494151 - Caterpillar

Daylight Saving
Path: Administration > General > Date & Time > daylight saving
Enable traditional United States Daylight Saving Time (DST). Enable and configure a customized daylight saving time to match how Daylight Saving Time is implemented in your local area. DST is disabled by default.When customizing Daylight Saving Time (DST):
If the local DST always starts or ends on the fourth occurrence of a specific weekday of a month, choose "Fourth/Last". If a fifth Sunday occurs in that month in a subsequent year, the time setting still changes on the fourth Sunday.
If the local DST always starts or ends on the last occurrence of a specific weekday of a month, whether the last day is the fourth or the fifth occurrence, choose "Fifth/Last".Format
Path: Administration > General > Date & Time > date format
Select the numerical format in which to display all dates in this user interface. In the selections, each letter m (for month), d (for day), and y (for year) represents one digit. Single-digit days and months are displayed with a leading zero. The format mmm represents a three-letter month name.Use an .ini File
Path: Administration > General > User Config File
Use the settings from one NMC to configure another. Retrieve the config.ini file from the configured NMC, customize that file, and upload the customized file to the new NMC. The file name can be up to 64 characters, and must have the.ini suffix.Status - Reports the progress of the upload. The upload succeeds even if the file contains errors, but a system event reports the errors in the event log.Upload - Browse to the customized file and upload the file so that the current NMC can use the file to set the NMCs own configuration.ReferenceTo retrieve and customize the file of a configured NMC, Refer to the "How to Export Configuration Settings" section in the, "Device Configuration " chapter of this manual.Instead of uploading the file to one NMC, you can export the file to multiple NMCs by using an FTP or SCP script or a batch file and the .ini file utility.Event Log, Temperature Units, Language, and Logon Page
Path: Administration > General > Preferences
Color-code Event Log Text
This option is disabled by default. Mark the "Event Log Color Coding" checkbox to enable color-coding of alarm text recorded in the event log. System-event entries and configuration-change entries do not change color.
Table 2
Text Color    Alarm Severity    
Red    Critical    A critical alarm exists, which requires immediate action.    
Orange     Warning     An alarm condition requires attention and could jeopardize your data or equipment if the alarms cause is not addressed.    
Green     Alarm Cleared     The conditions that caused the alarm have improved.    
Black     Normal     No alarms are present. The Network Management Card and all connected devices are operating normally.    Change the Default Temperature Scale
Select the temperature scale (Fahrenheit or Celsius) in which to display all temperature measurements in this user interface.Specify the UI Language
You can specify the default