CYLINDER GP-BOOM 3498546 - Caterpillar

Removal Procedure
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g02134048
Disconnect harness assembly (1) .
Remove variable valve actuator oil pressure sensor (2) .
Remove the O-ring seal from variable valve actuator oil pressure sensor (2) .Installation Procedure
Install variable valve actuator oil pressure sensor (2) in the reverse order of removal.
Tighten variable valve actuator oil pressure sensor (2) to a torque of 10 2 N m (89 18 lb in).