CYLINDER & LINES GP-BOOM 3536880 - Caterpillar

Selecting the Work Tool
Work Tool Control - Push the Work Tool Control button in order to display the current work tool selection. Push the button again in order to cycle through the available work tools. Push the button and hold the button for 2 seconds in order to activate the selected work tool. The system will remember the position at the next start-up cycle. The middle light B next to the button will illuminate for 10 seconds after the selection is made.The Work Tool Control System is available if the machine is equipped with a third function valve or a quick coupler. Implement system settings for each work tool are changed with the configuration menu for the implement system.Note: Refer to the Operation and Maintenance Manual, "Monitoring System" for a description of the navigation buttons and settings for each work tool.Monitoring System Display
The Monitoring System display is the main interface between the operator and the Work Tool Control System.Display Buttons
Illustration 1 g02109873
Control Buttons
(1) Four Way Navigation
(2) OK/Select
(3) Back/Previous
(4) Operator Menu
(5) Main Menu
(6) Backlight Configuring a Work Tool
The "Work Tool" menu allows the operator to change the settings for the work tool. Five different work tools can be configured.
Press the "Operator Menu" button.
Press the up arrow or the down arrow on the "Four Way Navigation" button in order to highlight the "Settings" menu. Press the "OK/Select" button.
Press the up arrow or the down arrow in order to highlight the "Work Tool" menu. Press the "OK/Select" button.
The "Work Tools" menu will be displayed with the current options for work tools. Press the up arrow or the down arrow in order to highlight the setting. Press the "OK/Select" button in order to change the highlighted setting. Note: Only settings for the active tool can be changed. Use the Work Tool Control button to change the active tool if settings for a different tool need to be changed.Note: Press the "Back/Previous" button in order to return to the default display.