CYLINDER & MTG GP-STEERING 3550401 - Caterpillar

Product smu/age whichever comes first Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
*******Group 2*******
0-7000 hrs,
0-24 mo 100.0% 100.0% 0.0% 0.0% 0.0% 0.0%
7001-14000 hrs,
25-48 mo 33.0% 50.0% 0.0% 0.0% 50.0% 50.0%
This is a 5.0-hour job for Group 2
PARTS DISPOSITION
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.
Rework Procedure
The Rework Procedure should be done during a normal hydraulic system oil change interval as described in the Operation and Maintenance Manual, "Maintenance Interval Schedule". The work should be done in a clean environment to minimize contamination.
Refer to SEBU7794, Operation and Maintenance Manual, "773F, and 775F OFF-HIGHWAY TRUCKS".
Refer to SEBU7837, Operation and Maintenance Manual, "770, 770 OEM, and 772 OFF- HIGHWAY TRUCKS".
Refer to SEBU7697, Operation and Maintenance Manual, "769D and 773E OFF-HIGHWAY TRUCKS AND 771D and 775E QUARRY TRUCKS".
1. Drain the hydraulic tank as described in the Operation and Maintenance Manual, "Hoist, Torque Converter and Brake Tank Oil - Change".
2. Remove the hydraulic tank cover.
3. Clean the mating surface on the tank in order to remove all gasket material and burrs on the machined surface. Use a 6V-0185 Reconditioning Disc, or similar reconditioning disc, in order to clean these surfaces.
4. Remove the sight gauge and retainer from the old hydraulic tank cover and reinstall on the new hydraulic tank cover using new seals and grommets. Refer to Image1.1.1.
Image1.1.1
5. Remove the screen assembly and associated components from the old hydraulic tank cover and reinstall on the new hydraulic tank cover. Refer to Image1.2.1.
Image1.2.1
6. Remove the filler cap, strainer, and associated components from the old hydraulic tank cover and reinstall on the new hydraulic tank cover. Refer to Image1.3.1.
Image1.3.1
7. Inspect the bottom of the hydraulic tank for debris and clean as needed.
8. Install either a 2814551/">281-4551 or 238-8734 Tank Cover Assembly using a new 238-1825 Gasket.
9. Refill the hydraulic tank as described in the Operation and Maintenance Manual, "Hoist, Torque Converter and Brake Tank Oil - Change."