3604621 CYLINDER & SEAL GP-BUCKET Caterpillar parts
319D L, 319D LN
Rating:
Alternative (cross code) number:
CA3604621
360-4621
3604621
CA3604621
360-4621
3604621
EXCAVATOR,
Number on catalog scheme:
For full view, you need register
Information:
1. Start the machine. Extend the stick completely, and lower the boom.
At operating temperature, the hydraulic oil tank is hot and under pressure. Hot oil can cause burns. To prevent possible personal injury, release the pressure in the implement hydraulic circuits (boom, stick and bucket) before any hydraulic lines or components are disconnected or removed.
2. Release the pressure in the hydraulic system as follows: a. Fully retract the rod in the stick cylinder.b. Adjust the position of the bucket so it will be flat on the ground when the boom is lowered.c. Lower the boom until the bucket is flat on the ground.d. Shut off the engine, and put the hydraulic activation control lever in the "Lock" position.e. Move the control levers for the boom, bucket, stick and swing through their full travel strokes. This will relieve any pressure that may be present in the pilot system.f. Slowly loosen the air breather cap on the hydraulic oil tank to release the pressure.g. Tighten the air breather cap on the hydraulic oil tank.h. The pressure in the hydraulic system has now been released. Lines and components can now be removed. 3. Disconnect the lubrication hose assembly at the head end of
At operating temperature, the hydraulic oil tank is hot and under pressure. Hot oil can cause burns. To prevent possible personal injury, release the pressure in the implement hydraulic circuits (boom, stick and bucket) before any hydraulic lines or components are disconnected or removed.
2. Release the pressure in the hydraulic system as follows: a. Fully retract the rod in the stick cylinder.b. Adjust the position of the bucket so it will be flat on the ground when the boom is lowered.c. Lower the boom until the bucket is flat on the ground.d. Shut off the engine, and put the hydraulic activation control lever in the "Lock" position.e. Move the control levers for the boom, bucket, stick and swing through their full travel strokes. This will relieve any pressure that may be present in the pilot system.f. Slowly loosen the air breather cap on the hydraulic oil tank to release the pressure.g. Tighten the air breather cap on the hydraulic oil tank.h. The pressure in the hydraulic system has now been released. Lines and components can now be removed. 3. Disconnect the lubrication hose assembly at the head end of
Caterpillar SIS machinery equipment:
Caterpillar SIS
319D L & 319D LN Excavators EAW00001-UP (MACHINE) POWERED BY C4.2 Engine »
360-4621
CYLINDER & SEAL GP-BUCKET
319D L & 319D LN Excavators AYF00001-UP (MACHINE) POWERED BY C4.2 Engine »
360-4621
CYLINDER & SEAL GP-BUCKET
319D L & 319D LN Excavators KFM00001-UP (MACHINE) POWERED BY C4.2 Engine »
360-4621
CYLINDER & SEAL GP-BUCKET
Caterpillar parts catalog:
Parts cylinder Caterpillar catalog:
1728402
CYLINDER GP-COUPLER
318C, 319D, 319D L, 319D LN, 320C, 320D, 320D L, 320D LRR, 320D RR, 320D2 L, 321C, 321D LCR, 322C, 323D L, PIN GRAB
318C, 319D, 319D L, 319D LN, 320C, 320D, 320D L, 320D LRR, 320D RR, 320D2 L, 321C, 321D LCR, 322C, 323D L, PIN GRAB
2798709
CYLINDER & SEAL GP-HYDRAULIC
319D, 319D L, 319D LN, 320E LN, 321D LCR, 323D L, 323D LN, 323D SA, 323E L, 325D L, 330D L
319D, 319D L, 319D LN, 320E LN, 321D LCR, 323D L, 323D LN, 323D SA, 323E L, 325D L, 330D L
2898148
CYLINDER & LINES GP-BOOM
319D L, 319D LN
319D L, 319D LN
2590848
CYLINDER & LINES GP-BOOM
319D, 319D L, 319D LN
319D, 319D L, 319D LN
2590862
CYLINDER & SEAL GP-BOOM
319D L, 319D LN
319D L, 319D LN
2898129
CYLINDER & SEAL GP-BOOM
319D L, 319D LN
319D L, 319D LN
2898145
CYLINDER & SEAL GP-BUCKET
319D L, 319D LN
319D L, 319D LN
2898153
CYLINDER & SEAL GP-BUCKET
319D L, 319D LN
319D L, 319D LN
2094280
CYLINDER-DAMPER
1090, 1190, 1190T, 1290T, 1390, 2290, 2390, 2391, 307D, 308D, 311D LRR, 312D, 312D L, 314D CR, 314D LCR, 315D L, 319D, 319D L, 320C FM, 320D, 320D FM, 320D FM RR, 320D L, 320D LN, 320D LRR, 320D RR, 3...
1090, 1190, 1190T, 1290T, 1390, 2290, 2390, 2391, 307D, 308D, 311D LRR, 312D, 312D L, 314D CR, 314D LCR, 315D L, 319D, 319D L, 320C FM, 320D, 320D FM, 320D FM RR, 320D L, 320D LN, 320D LRR, 320D RR, 3...
315D L, 318E L, 319D, 319D L, 319D LN, 320D, 320D FM, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 321D LCR, 323D L, 323D LN, 323D2 ...
2667807
CYLINDER AS
319D, 319D L, 319D LN
319D, 319D L, 319D LN
2898139
CYLINDER AS-HYDRAULIC
319D L, 319D LN
319D L, 319D LN
3604619
CYLINDER & SEAL GP-BUCKET
319D L, 319D LN
319D L, 319D LN
2898153
CYLINDER & SEAL GP-BUCKET
319D L, 319D LN
319D L, 319D LN
2898145
CYLINDER & SEAL GP-BUCKET
319D L, 319D LN
319D L, 319D LN
2590868
CYLINDER & SEAL GP-BUCKET
319D L, 319D LN
319D L, 319D LN
2590866
CYLINDER & SEAL GP-BUCKET
319D L, 319D LN
319D L, 319D LN
3604615
CYLINDER & SEAL GP-BOOM
319D L, 319D LN
319D L, 319D LN
2898154
CYLINDER GP-BUCKET
319D L, 319D LN
319D L, 319D LN
2807318
CYLINDER GP-BUCKET
319D L, 319D LN
319D L, 319D LN
2898130
CYLINDER GP-BOOM
319D L, 319D LN
319D L, 319D LN
3604617
CYLINDER & SEAL GP-STICK
319D L, 319D LN
319D L, 319D LN
2590864
CYLINDER & SEAL GP-STICK
319D L, 319D LN
319D L, 319D LN
2590852
CYLINDER & SEAL GP-STICK
319D, 319D L, 319D LN
319D, 319D L, 319D LN