CYLINDER GP-STICK 3647480 - Caterpillar

3647480 CYLINDER GP-STICK Caterpillar parts 301.6C

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA3647480
364-7480
3647480

Weight: 30 pounds 13 kg.

Buy CYLINDER GP-STICK 3647480 Caterpillar genuine, new aftermarket tractor parts with delivery
MINI HYD EXCAVATOR,

Compare Prices: .

As an associate, we earn commssions on qualifying purchases through the links below

Vollrath 3647480 Electric Drop-in Hot Food Well with (4) 12" x 20" Individual Insulated Wells, Auto-Fill & Thermostatic Controls

$3,424.43

04 Aug 2021

US: deqonline

Vollrath 3647480 Electric Drop-in Hot Food Well with (4) 12" x 20" Individual Insulated Wells, Auto-Fill & Thermostatic Controls
Vollrath

This part in 2 request: Show. This information for suppliers only!

#665882 3647480

2021-06-09

#455512 3647480

2020-04-29

Number on catalog scheme:

Caterpillar 3647480 Parts scheme CYLINDER GP-STICK

For full view, you need register

Compatible equipment models: 3647480:

MINI HYD EXCAVATOR 301.6C Caterpillar

Information:

Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 422-5472 Lifting Eye Assembly 2 Start By:
Remove the swing drive.
Illustration 1 g03392475
Attach Tooling (A) to bolt holes (1). Attach a suitable lifting device to Tooling (A). The weight of swing motor (2) is approximately 19 kg (42 lb). Remove bolts (3) and swing motor (2).
Illustration 2 g03392542
Remove O-ring seal (5) and carrier assembly (4).
Illustration 3 g03667678
Illustration 4 g03667682
Remove retaining ring (8) and planetary gear (7) from carrier assembly (4).
Remove thrust washer (9), bearing race (10), needle bearing (11), and thrust washer (12) from planetary gear (7). Repeat for remaining planetary gears (7).
Remove sun gear (6).
Illustration 5 g03667696
Illustration 6 g03667702
Remove screws (13) and ring (15).
Remove planetary gear (16). Remove thrust washer (20), bearing race (19), and needle bearing (18) from planetary gear (16). Repeat for remaining planetary gears (16).
Remove sun gear (14). Remove carrier (17).
Illustration 7 g03667718
Remove retainers (21).
Illustration 8 g03667721
Use a suitable press to remove pinion (22). Remove bearing (23).
Illustration 9 g03667727
Remove bearing cone (24) and washer (25) from pinion (22).
Illustration 10 g03667759
Turn over housing (27) and remove bearing cup (26).
Illustration 11 g03667766
Remove bearing cup (28) and seal (29).