CYLINDER & SEAL GP-STICK 3683217 - Caterpillar

Image2.2.1
4. Refer to Image2.3.1. Inspect the fitting installed in the engine.
- If the 2P-1292 Fitting is installed, proceed to Step 5.
- If the 9M-4584 Fitting is installed, remove the 9M-4584 Fitting and replace it with the new 2P-1292 Fitting and new 033-6027 O-ring seal.
Image2.3.1
Refer to Image2.4.1 for Assembly
Assembly:
5. Install the 6K-3607 Connector (8) that was removed from the back of the cylinder head in Step 3 and a new 033-6027 O-ring seal (9) into the 237-2849 Tee (10) installed in the engine.
6. Install a new 286-9133 Check Valve Assembly (2) and 033-6027 O-ring (1) into the valve cover base.
7. Install a new 112-4387 Elbow (3) onto the check valve assembly (2).
8. Attach the new 344-1950 and 344-1951 Clips (6) to the 340-1286 Hose Assembly (7) with the curved half of the clip toward the engine. Tie the loose ends of the clips in order to hold the clips together during the assembly to the engine.
9. Attach the hose assembly to the lower connector (8) and