CYLINDER GP-BUCKET 3743206 - Caterpillar

Illustration 18 g01050185
Remove cable assembly (31) from the positive connecting post. Remove ground cable (32). Remove ground cable (33) .
Illustration 19 g01050187
Disconnect harness assembly (34) .
Illustration 20 g01050188
Cut cable strap (35) that secures the harness assembly to the frame.
Illustration 21 g01050189
Cut cable straps (36) that secure the harness assembly to the fuel tank.
Illustration 22 g01050191
Disconnect harness assembly (37) from the main power relay.
Disconnect harness assembly (38) from the glow plug relay.
Disconnect harness assembly (39) from the back of the bracket assembly.
Illustration 23 g01050192
Remove footrests (40). Remove floormat (41) .
Illustration 24 g01050194
Remove floor access plate (42) from the machine.
Illustration 25 g01050195
Disconnect heater hoses (43) .
Illustration 26 g01050197
Remove bolts (44) and air ducting (45) in order to gain access to the clamp that secures the decelerator cable to the flywheel housing.
Illustration 27 g01050204
Remove clamp (46) that secures the decelerator cable to the flywheel housing.
Illustration 28 g01050206
Remove the cotter pin and the pin and disconnect governor cable (47) from the fuel pump housing.
Illustration 29 g01050209
Use a suitable lifting device to support cab (48). The weight of the cab assembly is approximately 771 kg (1700 lb).
Illustration 30 g01050217
Remove nut (50). Remove bolt (49), sleeve (52), and washer (51) from the right side front cab mount assembly. Repeat Step 37 for the left side front mount assembly.
Illustration 31 g01050218
Remove nut (54). Remove bolt (53), sleeve (56), and washer (55) from the right side rear cab mount assembly. Repeat Step 38 for the left side rear mount assembly.
Carefully remove the cab from the machine.