CYLINDER AS-TILT 3795189 - Caterpillar

Illustration 1 g01416057
(2) Wiring harnesses (1) Lightly lubricate the bore of the adapter for the ignition transformer group with the lubricant that is being sealed.Note: Apply 4C-9614 Silicone Sealant to the mating face of the harness connector. Install the connector within ten minutes in order to avoid hardening before the seal has been made. Note: Align the connector with the notch in the uppermost position. (3) Spark plug Torque for spark plug ... 26 4 N m (19 3 lb ft) Electrode gap ... 0.28 0.03 mm (0.011 0.001 inch)
Illustration 2 g01416058
View of area A
Illustration 3 g01415185
Left side view of the engine (7) Front face of the cylinder blockNote: Install one cable strap (4) for each valve cover that is shown in Illustration 3. Strap the harness assembly to support rod (5) . (4) Locate tiewrap strap head on the back side of the clip (6) that is shown in Illustration 2 in order to tighten the cable strap. (5) Remove all the labels from support rods and harness assembly before installation.