CYLINDER GP-BULLDOZER LIFT 3805284 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 463-3380 Lift As 1
Fuel leaked or spilled onto hot surfaces or electrical components can cause a fire. To help prevent possible injury, turn the start switch off when changing fuel filters or water separator elements. Clean up fuel spills immediately.
Drain the fuel tank. Refer to Operation and Maintenance Manual, "Refill Capacities" for the correct draining and filling procedure.
Raise the hood by activating the switch. Turn off the disconnect switch after the hood has been raised.
Illustration 1 g06085675
Illustration 2 g06085739
Remove clip (1). Remove baffle assembly (2). Remove clip (3).
Illustration 3 g06085770
Remove clips (4) and (5) from the air conditioning hose assemblies. Remove clip (6) from the harness assembly.
Illustration 4 g06085775
View from underneath the cooling package and above the fuel tank.
Disconnect hose (7) and remove clips (8).
Illustration 5 g06085784
Disconnect harness assembly (9) from the fuel level sensor.
Illustration 6 g06085799
Remove eight bolts (10) from transmission oil cooler (11).
Illustration 7 g06089355
Remove fuel fill tube (12).
Illustration 8 g06211981
Position Tooling (A) under fuel tank (13). The weight of fuel tank (13) is approximately 227 kg (500 lb)
Illustration 9 g06089372
Remove bolts (14) from both sides.
Illustration 10 g06211981
Illustration 11 g06089374
Remove bolt (15). Lower fuel tank (13).Installation Procedure
Install fuel tank (13) in the reverse order of removal.