CYLINDER AS 3821535 - Caterpillar

PARTS NEEDED
Qty
Part Number Description
1 4N1320 GASKET-ADAPTER
1 6V1454 SEAL-O RING
1 6V5066 SEAL-O RING
1 3907470 ELBOW
In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 32% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer.
ACTION REQUIRED
Replace the 3907470/">390-7470 Elbow. Refer to the attached Rework Procedure.
SERVICE CLAIM ALLOWANCES
Product smu/age whichever comes first Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
0-6000 hrs,
0-24 mo 100.0% 100.0% 0.0% 0.0% 0.0% 0.0%
This is a 2.0-hour job
PARTS DISPOSITION
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.
Rework Procedure
Drain the Cooling system into a suitable container for reuse.
Retain all hardware for reuse.
Reference Image1.1.1.
1. Remove the Alternator Guard Bolts (1) and the Alternator Guard.
2. Remove the P-clip bolts (2) and the P-clip.
3. Remove the Bracket bolts (3) and the Bracket.
4. Remove the Fuel Line Clip bolt (4) and the clip.
Image1.1.1
5. Remove the 4 bolt clamp on the 3907470/">390-7470 Tube at the Oil Cooler flange.
6. Remove the 3907470/">390-7470 Tube. This can be done by pulling the bottom of the tube out and rotating.
7. Install new 6V-1454 O-ring and 6V-5066 O-ring on new 3907470/">390-7470 Elbow.
8. Utilizing the new 4N-1320 Gasket reassemble the engine by performing steps 1-6 in reverse order.