CYLINDER & SEAL GP-STICK 3852831 - Caterpillar

Removal Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g06295741
Disconnect hoses (1) and (4).
Loosen clamps (3) and (5). Remove hoses (2) and (6).
Illustration 2 g06295745
Remove nuts (7) and cover (8).
Illustration 3 g06295758
Remove separator assembly (9).Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Install separator assemblies (9) in the reverse order of removal.Note: Ensure that the foam damper pads are installed with the separator assemblies.