CYLINDER GP-CENTERSHIFT 3G5224 - Caterpillar

Illustration 1 g02551321
Table 1
Specification for the 197-9322 Cylinder Block Liner, 238-2700 Cylinder Block Liner, and 2W-6000 Cylinder Block Liner
Item Qty Part Specification Description
A - - New cylinder liner bore is 137.185 0.025 mm (5.4010 0.0010 inch).
B - - Flange Thickness is 8.890 0.020 mm (0.3500 0.0008 inch).
Minimum thickness is 8.870 mm (0.3492 inch).
Use the following procedure to install the cylinder liner:
1. Put liquid soap on the cylinder block liner bore surfaces and the rubber seals that are on the lower end of the cylinder liner.
2. Dip the filler band (1) completely in clean engine oil.
3. Immediately install the filler band (1) in the groove that is under the cylinder liner flange.
4. Install the cylinder liner into the cylinder block before the expansion of the filler band.
Refer to Guideline For Reusable Parts and Salvage Operations, SEBF8068, "Cylinder Liners" for more information. Also, refer to Reuse And Salvage Guidelines, SEBF8049, "Visual Inspection of the Piston" for more information.