3G6457 CYLINDER GP-RIPPER Caterpillar parts
D8L, D9N
Rating:
Alternative (cross code) number:
CA3G6457
3G-6457
3G6457
CA3G6457
3G-6457
3G6457
Weight: 384 pounds 174 kg.
Information:
BORE DIAMETER
210
mm
CLOSED LENGTH
940
mm
PIN SIZE CAP END
76.2
mm
PIN SIZE ROD EYE
76.2
mm
ROD DIAMETER
82.55
mm
STROKE
457
TYPE
BOLTED HEAD
TRACK-TYPE TRACTOR,
Information:
Sudden movement of the machine or release of oil under pressure can cause serious injury to persons on or near the machine.To prevent possible injury, perform the procedure that follows before testing and adjusting the hydraulic system.
Personal injury or death can result from escaping fluid under pressure.Escaping fluid under pressure, even a very small pin-hole size leak, can penetrate body tissue and cause serious injury and possible death. If fluid is injected into your skin, it must be treated by a doctor familiar with this type of injury.Always use a board or cardboard when checking for a leak.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Note: Permit only one operator on the machine. Keep all other personnel away from the machine or in the sight of the operator.
Move the machine to a hard, level surface. Lower the work tool to the ground.
Place the transmission direction and speed control in the NEUTRAL position and in any speed position. Engage the steering and transmission lock lever on STIC steering machines. Engage the transmission neutral lock on wheel steering machines.
Engage the parking brake. Place wheel blocks in front of the wheels and behind the wheels.
Stop the engine.
Install the steering frame lock.
Move the key start switch to the ON position.
Move the joystick control lever through the full range of travel. Moving the joystick control lever will relieve any pressure that may be present in the implement hydraulic system. Place the joystick control lever in the HOLD position.
Move the steering control several times in both directions to release the pressure in the steering system.
Depress the brake pedal repeatedly. Depressing the brake pedal will relieve any pressure that may be present in the braking system.
Depress the breaker relief valve on the hydraulic tank to release the pressure in the hydraulic tank.
Caterpillar SIS machinery equipment:
Caterpillar SIS
D8L TRACTOR 53Y00001-UP (MACHINE) POWERED BY 3408 ENGINE »
3G-6457
CYLINDER GP-RIPPER
D8L TRACTOR 53Y00001-UP (MACHINE) POWERED BY 3408 ENGINE »
3G-6457
CYLINDER GP-RIPPER
D9N TRACTOR 1JD00001-UP (MACHINE) POWERED BY 3408 ENGINE »
3G-6457
CYLINDER GP-RIPPER
D9N TRACTOR 1JD00001-UP (MACHINE) POWERED BY 3408 ENGINE »
3G-6457
CYLINDER GP-RIPPER
D9N TRACTOR 6XJ00001-UP (MACHINE) POWERED BY 3408 ENGINE »
3G-6457
CYLINDER GP-RIPPER
D8L TRACTOR / POWER SHIFT / 7JC00001-UP (MACHINE) POWERED BY 3408 ENGINE »
3G-6457
CYLINDER GP-RIPPER
D8L TRACTOR / POWER SHIFT / 7JC00001-UP (MACHINE) POWERED BY 3408 ENGINE »
3G-6457
CYLINDER GP-RIPPER
D8L TRACTOR 7YB01573-UP (MACHINE) POWERED BY 3408 ENGINE »
3G-6457
CYLINDER GP-RIPPER
Caterpillar parts catalog:
Parts cylinder Caterpillar catalog:
6E3113
CYLINDER GP-RIPPER PIN PULLER
D10N, D10R, D10T, D10T2, D11N, D11R, D11T, D8N, D8R, D8R II, D8T, D9N, D9R, D9T
D10N, D10R, D10T, D10T2, D11N, D11R, D11T, D8N, D8R, D8R II, D8T, D9N, D9R, D9T
7W2224
CYLINDER HEAD GP
3408, 3408B, 3408C, 589, 631D, 631E, 633D, 637D, 637E, 639D, 657E, 768C, 769C, 771C, 834B, 836, 988B, 988F, D8L, D9N, D9R, PM-565, PR-450, PR-450C
3408, 3408B, 3408C, 589, 631D, 631E, 633D, 637D, 637E, 639D, 657E, 768C, 769C, 771C, 834B, 836, 988B, 988F, D8L, D9N, D9R, PM-565, PR-450, PR-450C
1430041
CYLINDER HEAD AS
3408, 3408B, 3408C, 3412, 589, 631D, 631E, 631G, 633E II, 637E, 637G, 657E, 769C, 769D, 771C, 771D, 834B, 836, 988B, 988F, 988F II, D8L, D9N, D9R, PM-565, PM-565B, PR-450C
3408, 3408B, 3408C, 3412, 589, 631D, 631E, 631G, 633E II, 637E, 637G, 657E, 769C, 769D, 771C, 771D, 834B, 836, 988B, 988F, 988F II, D8L, D9N, D9R, PM-565, PM-565B, PR-450C
3G5707
CYLINDER GP-TILT
D8L, D9N
D8L, D9N
7W2225
CYLINDER HEAD AS
3408, 3408B, 3408C, 3408E, 3412, 589, 631D, 631E, 633D, 633E II, 637D, 637E, 639D, 657E, 768C, 769C, 769D, 771C, 771D, 834B, 836, 988B, 988F, 988F II, D8L, D9N, D9R, PM-565, PM-565B, PR-450, PR-450C
3408, 3408B, 3408C, 3408E, 3412, 589, 631D, 631E, 633D, 633E II, 637D, 637E, 639D, 657E, 768C, 769C, 769D, 771C, 771D, 834B, 836, 988B, 988F, 988F II, D8L, D9N, D9R, PM-565, PM-565B, PR-450, PR-450C
7N0858
CYLINDER HEAD AS
3408, 631D, 633D, 637D, 639D, 657E, 768C, 769C, 834B, 988B, D8L
3408, 631D, 633D, 637D, 639D, 657E, 768C, 769C, 834B, 988B, D8L
9T2860
CYLINDER GP-LIFT
D8L, D9N
D8L, D9N
6E3976
CYLINDER AS
D10N, D10R, D10T, D10T2, D11N, D11R, D11T, D8N, D8R, D8R II, D8T, D9N, D9R, D9T
D10N, D10R, D10T, D10T2, D11N, D11R, D11T, D8N, D8R, D8R II, D8T, D9N, D9R, D9T
3G8194
CYLINDER AS
844, 844H, 844K, D8L, D9N
844, 844H, 844K, D8L, D9N
9P6840
CYLINDER ASSEM. (L.H.)
D8L, D9N
D8L, D9N
3G6828
CYLINDER AS-HYD
D8L, D9N
D8L, D9N
2W4640
CYLINDER BLOCK GP
3408, 657E, 988B, D8L
3408, 657E, 988B, D8L
1U1988
CYLINDER GP-TILT
815B, 815F, 815F II
815B, 815F, 815F II
3G9269
CYLINDER AR-TILT
815B, 815F
815B, 815F
1U2137
CYLINDER GP-TILT & TIP
814B, 814F, 814F II
814B, 814F, 814F II
4W7006
CYLINDER HEAD GP
990, 992C, 992D
990, 992C, 992D