3G7643 CYLINDER GP-STEER Caterpillar parts
14G
Rating:
Alternative (cross code) number:
CA3G7643
3G-7643
3G7643
CA3G7643
3G-7643
3G7643
Weight: 36 pounds 16 kg.
Information:
BORE DIAMETER
69.85
mm
CLOSED LENGTH
554.7
mm
PIN SIZE CAP END
31.8
mm
PIN SIZE ROD EYE
0
mm
ROD DIAMETER
38.1
mm
STROKE
291.6
TYPE
THD CROWN
MOTOR GRADER,
Compatible equipment models: 3G7643:
Number on catalog scheme:
2
For full view, you need register
Information:
Install the steering frame lock when the machine is being lifted and when the machine is being transported. Also install the steering frame lock if you are performing service work near the articulating hitch.The steering frame lock is located at the articulating hitch in the center of the machine.Installation Procedure
Move the machine to a hard, level surface. Park the machine in the straight ahead position and engage the parking brake.
Stop the engine.
Check that the steering frame lock bores in the front frame and the rear frame are aligned.
Illustration 1 g01241891
Remove steering frame lock pin (1) from the stored position.
Illustration 2 g01241893
Place steering frame lock pin (1) in the installed position.
Ensure steering frame lock pin (1) passes through the three bores.
Illustration 3 g01893095
Typical example
Machine frames can move and the steering frame lock pin can be expelled if the steering frame lock pin is only partially installed or the pin bevel is in contact with the upper edge of the front frame.Personal injury can result from machine articulation
Move the machine to a hard, level surface. Park the machine in the straight ahead position and engage the parking brake.
Stop the engine.
Check that the steering frame lock bores in the front frame and the rear frame are aligned.
Illustration 1 g01241891
Remove steering frame lock pin (1) from the stored position.
Illustration 2 g01241893
Place steering frame lock pin (1) in the installed position.
Ensure steering frame lock pin (1) passes through the three bores.
Illustration 3 g01893095
Typical example
Machine frames can move and the steering frame lock pin can be expelled if the steering frame lock pin is only partially installed or the pin bevel is in contact with the upper edge of the front frame.Personal injury can result from machine articulation
Caterpillar SIS machinery equipment:
Caterpillar parts catalog:
Parts cylinder Caterpillar catalog:
12G, 12H, 12H ES, 12H NA, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H NA, 160G, 160H, 160H ES, 160H NA, 163H NA, 235, 235B, 3306, 3306B, 528, 528B, 530B, 814B, 815B, 816B, 966C, 966D, 966R, 972G, D25...
120B, 12G, 140G, 14G, 1673C, 235, 3306, 528, 561D, 571G, 572G, 627B, 637D, 639D, 814, 815, 816, 966C, 977L, D5B, D6D, D7F, D7G
120B, 12G, 12H, 12H ES, 12H NA, 140B, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H NA, 160G, 160H, 160H ES, 160H NA, 163H NA, 1673C, 235, 235B, 235C, 235D, 330, 330 FM L, 330 L, 3306, 3306B, 3306C, 33...
14G, 14H, 14H NA, 16G, 16H, 16H NA
12G, 12H, 12H ES, 12H NA, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H NA, 160H, 160H ES, 160H NA, 163H NA, 235, 235B, 235D, 330, 330 FM L, 330 L, 3306, 3306B, 330B, 330B L, 350, 528, 528B, 530B, 545,...
12G, 12H, 12H ES, 12H NA, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H NA, 160G, 160H, 160H ES, 160H NA, 163H NA, 235B, 3306, 3306B, 330B L, 350, 528B, 530B, 815B, 966F, 966F II, 966G, 970F, 972G, 973...
14G, 14H NA, 16G, 16H NA, 3176, 3176B, 3176C, 3196, 3304, 3306, 3306B, 3306C, 3406B, 3406C, 3406E, 3508, 3508B, 3512, 3512B, 3516, 3516B, 611, 615C, 621, 621E, 621F, 621R, 623E, 623F, 627E, 627F, 814B...
12G, 12H, 140G, 140H, 140H NA, 143H, 14G, 160H, D6D, D6H, D6H XL, D6H XR, D6R
120G, 12G, 130G, 140G, 14G, 160G, 16G, 508
120G, 12G, 130G, 140G, 14G, 160G, 16G
8J1599
CYLINDER GP
633, 633D, 639D
633, 633D, 639D
7J1693
CYLINDER GP-HYDRAULIC
633, 633D
633, 633D
6J1516
CYLINDER GP-HYDRAULIC
633, 633D
633, 633D
3G9677
CYLINDER GP
633D, 633E, 639D
633D, 633E, 639D
988B
