CYLINDER & LINES GP-LIFT 4175994 - Caterpillar

Turn the switch to put the lever in correct alignment with the shift marks (numbers) on the cover.(1) Assemble gear (1) and pinion (4) so that timing marks are aligned.(2) Adjust nut (2) to get .006 .004 in. (0.15 0.10 mm) clearance between the washer and gear.(3) Check tooth clearance (gear backlash) at each lever position. There must be .001 to .004 in. (0.03 to 0.10 mm) gear backlash when it is measured at the lever position that has the least amount of gear backlash. To adjust, loosen nut (3) and turn shaft (5) to get correct gear adjustment. Tighten nut (3) to ... 32 5 lb. ft.(43 7 N m)