CYLINDER & LINES GP-LIFT 4175995 - Caterpillar

(1) Before installation of the seal, install 7M7260 Liquid Gasket Material on seal bore surface in the case and let dry. Do not install gasket material to the case of the lip type seal. Put a small amount of lubricant on the lip of the seal before installation.(2) Torque for the nuts that hold the levers to the shaft ... 25 3 lb. ft(35 4 N m)(3) 4M1768 Springs (two): Length under test force ... 4.24 in.(107.7 mm)Test force ... 15.2 1.2 lb.(68 5 N)Free length after test ... 3.76 in.(95.5 mm)Outside diameter ... 62 in.(15.7 mm)(4) Distance between the lever and the link ... .09 in.(2.3 mm)(5) Torque for four bolts ... 22 3 lb. ft.(28 4 N m)(6) Torque for two nuts that hold the links in position ... 25 lb. ft.(35 7 N m)(7) Torque for the nut that holds the link in position ... 15 3 lb. ft(20 4 N m)(8) Torque for two bolts that hold the accumulator to the transmission case ... 35 3 lb. ft.(45 4 N m)(9) Torque for five bolts with six point heads ... 35 3 lb. ft.(45 4 N m)(10) Torque for the bolts with twelve point heads ... 22 3 lb. ft.(28 4 N m)(11) Install downshift solenoid at angle (A) of ... 20°(12) Distance from ring to inside of transmission case ... .06 in.(1.5 mm)(13) Torque for four nuts that hold the links in position ... 25 5 lb. ft.(35 7 N m)