4185367 CYLINDER GP-ANGLING Caterpillar parts
Rating:
Alternative (cross code) number:
CA4185367
418-5367
4185367
CA4185367
418-5367
4185367
Weight: 74 pounds 33 kg.
Information:
In 24 Volt systems, do not use a maintenance free battery with any other type of battery (low maintenance on conventional). The batteries will be destroyed when they are charged.
Self-Discharge
When any type of battery has been activated and not put into service, it is subject to self-discharge. The rate of self-discharge is basically related to two factors. First, is the metal composition (alloy) of the grid for the battery plates and second, is the ambient temperature in which the battery is stored. Caterpillar maintenance free batteries have lead calcium alloy grids and an extremely low self-discharge rate. It is so low that in an ambient temperature not exceeding 27°C (80°F), shelf life before recharging is 12 months from the date of manufacture. At this point, the OCV (Open Circuit voltage) will have reduced to approximately 12.4 volts. The illustration shows relative discharge rates between maintenance free, low maintenance and conventional batteries.
Discharge rates.Storage at Elevated Temperatures
As ambient temperatures increase, all activated batteries self-discharge at an increasing rate. For all batteries including maintenance free batteries, this is approximately double for every 10°C (18°F) above 27°C (80°F). Thus, at an ambient temperature of 37°C (98°F), recharge will become necessary after six months and at 47°C (116°F) recharge after about three months. Whenever possible, avoid storage at elevated temperatures. Since climatic conditions vary with the seasons of the year, the best indicator for the correct recharge time in temperatures above 27°C (80°F) is when the OCV falls below 12.4 volts. Recharge as many times as required without exceeding a total of two years shelf life to maintain the OCV at or above 12.4 volts. Keep this recharging to a minimum by maximizing stock turnover. Should the OCV be allowed to fall below 12.4 volts for a long period of time, battery deterioration and eventual reduction of service will occur. The end result can be permanent reduction of capacity, lack of cranking capacity and internal short circuits. To avoid these conditions, the best safeguard is to maintain the OCV at 12.4 volts or more.
Stock Rotation
All battery stock should be rotated on a first in, first out basis. This is especially true for wet maintenance free batteries. Proper battery rotation will reduce recharge and warranty cost. It will also provide the user with a better product. If stock recharge is required, the after charge, open circuit voltage should be 12.6 volts or above when surface charge has been removed.
Recharge for Storage
To fully recharge a maintenance free battery: 1. Select the lowest charge rate for the amp hour rating of the battery from the chart on page 13 of Special Instruction SEHS7633-01, "Battery Test Procedure" or Special Instruction, SMHS8561, "Battery Rating And Cross Reference Chart".2. Using a 6V7070 (or equivalent) Multimeter Group, charge until the terminal voltage reaches 15.5 V, but do not exceed 16.0 V.3. After reaching 15.5 V, charge an additional one hour. This should bring the charge level of the battery to full charge for restorage.
Test
Two criteria are used for testing a
Caterpillar SIS machinery equipment:
Caterpillar SIS
D3K2 Small Track Type Tractor FT300001-UP (MACHINE) POWERED BY C4.4 Engine »
418-5367
CYLINDER GP-ANGLING
D5K2 XL & D5K2 LGP Small Track Type Tractor KW200001-UP (MACHINE) POWERED BY C4.4 Engine »
418-5367
CYLINDER GP-ANGLING
D4K2 XL & D4K2 LGP Small Track Type Tractor KM200001-UP (MACHINE) POWERED BY C4.4 Engine »
418-5367
CYLINDER GP-ANGLING
D3K2 XL & D3K2 LGP Small Track Type Tractor JPJ00001-UP (MACHINE) POWERED BY C4.4 Engine »
418-5367
CYLINDER GP-ANGLING
D5K2 XL & D5K2 LGP Small Track Type Tractor WT300001-UP (MACHINE) POWERED BY C4.4 Engine »
418-5367
CYLINDER GP-ANGLING
D4K2 XL & D4K2 LGP Small Track Type Tractor MT300001-UP (MACHINE) POWERED BY C4.4 Engine »
418-5367
CYLINDER GP-ANGLING
Caterpillar parts catalog:
Parts cylinder Caterpillar catalog:
4185362
CYLINDER GP-ANGLING
Caterpillar
Caterpillar
4185358
CYLINDER GP-LIFT
Caterpillar
Caterpillar
4185357
CYLINDER GP-TILT
Caterpillar
Caterpillar
4185348
CYLINDER GP-LIFT
Caterpillar
Caterpillar
4185347
CYLINDER GP-BULLDOZER LIFT
Caterpillar
Caterpillar
3984530
CYLINDER AR-LIFT
Caterpillar
Caterpillar
4530138
CYLINDER GP-HYDRAULIC
Caterpillar
Caterpillar
4310262
CYLINDER & LINES GP
Caterpillar
Caterpillar
4187448
CYLINDER & LINES GP-BUCKET
Caterpillar
Caterpillar
4185373
CYLINDER AS
Caterpillar
Caterpillar
4185372
CYLINDER GP-RIPPER
Caterpillar
Caterpillar
4185368
CYLINDER AS-HYDRAULIC
Caterpillar
Caterpillar