CYLINDER & SEAL GP-STICK 4188805 - Caterpillar

Assembly Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: Cleanliness is an important factor. Before assembly, thoroughly clean all parts in cleaning fluid. Allow the parts to air dry. Do not use wiping cloths or rags to dry parts. Lint may be deposited on the parts which may cause trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement. Dirt and other contaminants can damage the precision component. Perform assembly procedures on a clean work surface. Keep components covered and protected at all times.Note: Check the O-ring seals for wear or for damage. Replace the components, if necessary.
Illustration 1 g01414733
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install O-ring seal (7), O-ring seal (8), and O-ring seal (9) to collar (10). Install collar (10) and install boot (11).
Illustration 2 g01414609
Install O-ring seal (6) and O-ring seal (5). Position control valve body (3). Install the washers and bolts (4).
Illustration 3 g01414506
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install O-ring seal (2) onto plug (1). Install plug (1) into control valve body (3). End By:
Install the brake control valve. Refer to Disassembly and Assembly, "Control Valve (Brake) - Install".

Parts cylinder Caterpillar catalog:

2195847 CYLINDER HEAD GP
120K, 120K 2, 12K, 12M, 140G, 140K, 140K 2, 140M, 160K, 324D, 324D FM, 324D FM LL, 324D L, 324D LN, 325D, 325D FM, 325D FM LL, 325D L, 325D MH, 326D L, 328D LCR, 329D, 329D L, 329D LN, 525C, 535C, 545...

2426756 CYLINDER & SEAL GP-BUCKET
320D, 320D FM, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 321D LCR, 323D L, 323D LN, 323D SA, 324D, 324D L

3058141 CYLINDER BLOCK GP
120H, 120K, 120K 2, 12K, 12M, 135H, 140G, 140K, 140K 2, 140M, 160K, 30/30, 3126, 3126B, 3126E, 322C, 322C FM, 324D, 324D FM, 324D FM LL, 324D L, 324D LN, 325C, 325C FM, 325D, 325D FM, 325D FM LL, 325D...

2426759 CYLINDER & SEAL GP-BUCKET
320D, 320D FM, 320D L, 320D LN, 320D LRR, 320D RR, 323D L, 323D LN, 324D, 324D L

3412814 CYLINDER & SEAL GP-BUCKET
320D, 320D FM, 320D GC, 320D L, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 321D LCR, 323D L, 323D2 L, 323E L, 324D

2897975 CYLINDER GP-BUCKET
324D, 324D FM, 324D L, 324D LN

2394375 CYLINDER
324D, 324D L, 324D LN, 324E, 324E L, 324E LN, 326D L

3509336

3509336 CYLINDER AS
324D, 324D L, 324E, 324E L, 324E LN, 326D L

3154443

3154443 CYLINDER AS-HYDRAULIC
324D, 324D L, 324D LN, 325D, 325D L, 326D L, 329D, 329D L, 330D, 330D L, 330D LN, 336D, 336D L, 336D2, 340D L, 345C L, 385C, 385C L

2897949

2897949 CYLINDER AS
320D, 320D FM, 320D2, 320D2 L, 323D L, 323D LN, 324D L, 325D L, 330D L, 336D L, 345C L, M325D L MH, M325D MH

2897958

2897958 CYLINDER AS-HYDRAULIC
324D, 324D FM, 324D L, 324D LN

2897976

2897976 CYLINDER AS-HYDRAULIC
324D, 324D FM, 324D L, 324D LN

4188803

4188803 CYLINDER & SEAL GP-BOOM
324D, 324D L

4188802

4188802 CYLINDER & LINES GP-BOOM
324D, 324D L

3402439

3402439 CYLINDER & VALVE GP
P215, VHP-30