CYLINDER BLOCK GP 4208851 - Caterpillar

Illustration 1 g06303916
Front view
Table 1
Item Qty Part Specification Description
1 2 318-1179 Speed Sensor Gp Final installation torque is 37 4 N m (27 3 lb ft).
2 1 6Y-6328 Shim Pack As required, use the following shim pack (contains 13 shims) to obtain bearing adjustment.
Total thickness of one shim pack is 1.85 mm (0.073 inch).
Thickness of each shim in the shim pack for six shims is 0.25 mm (0.010 inch).
Thickness of each shim in the shim pack for five shims is 0.05 mm (0.002 inch).
3 11 6V-5684 Bolt Torque to 120 20 N m (89 15 lb ft).
4 7 6V-7673 Bolt Torque to 120 20 N m (89 15 lb ft).
5 1 7L-2181 O-Ring Seal Lubricate the bore lightly with the lubricant that is being sealed.
6 9 6V-3823 Bolt Torque to 120 20 N m (89 15 lb ft).
7 2 0L-1328 Bolt Before assembly, apply red Loctite 271 to the threads.
Torque to 475 60 N m (350 44 lb ft).
8 2 133-4292 Lip Type Seal Lubricate the sealing lip lightly with the lubricant that is being sealed.
Install lip seal flush with the face of the bearing cage.
9 1 2K-4472 O-Ring Seal Lubricate lightly with the lubricant that is being sealed.
10 8 6V-5696 Bolt Torque to 120 20 N m (89 15 lb ft).
11 1 5J-1086 O-Ring Seal Lubricate the bore lightly with the lubricant that is being sealed.
12 1 9J-7031 Drain Plug Torque to 68 7 N m (50 5 lb ft).
13 1 7B-3039 Spring Length under test force is 26.19 mm (1.031 inch).
Test force is 14.32 to 16.81 N (3.22 to 3.78 lb).
Free length after test is 36.53 mm (1.438 inch).
Illustration 2 g06303922
View B-B
Table 2
Item Qty Part Specification Description
14 - - Surface must be free of oil and grease
Before assembly, apply 6V-5765 Sealant to the matting surface.
Illustration 3 g06303929
Rear view
Table 3
Item Qty Part Specification Description
15 2 8T-0282 Bolt Torque to 270 40 N m (199 30 lb ft).
16 18 8T-0281 Bolt Torque to 270 40 N m (199 30 lb ft).