CYLINDER AS 4220828 - Caterpillar

Illustration 14 g06031677
(E) 275-5890 Snow Wing Lines and Mounting Gp
Use Special Instruction, GEHS0509 for the installation procedure of the 275-5890 Snow Wing Lines and Mounting Gp.Installation of the 275-5875 Blade Gp
Table 6
275-5875 Blade Gp (- 05) (C)
Item Qty Part No. Part Name
(1c) 1 3B-8489 Grease Fitting
(2c) 2 4T-2968 Cutting Edges
(3c) 1 277-3728 Moldboard Assembly
(4c) 1 277-3731 Rubber Stop
(5c) 1 1J-5929 Bolt
(6c) 26 4F-3654 Bolts
(7c) 26 4K-0367 Bolts
(8c) 1 6K-3632 Locknut
(9c) 2 6V-5684 Bolts
(10c) 2 8T-4223 Hard Washers
Illustration 15 g06037435
Overview of the 275-5875 Blade Gp
Illustration 16 g06037412
(B) 499-3074 Mast Gp
(C) 275-5875 Blade Gp
(G) 452-4030 Lift Link
(J) 468-1682 Extension Tube GpNote: The estimated weight of the 275-5875 Blade Gp is 432 kg (953 lb)
Use a suitable lifting device to lift the blade (C) into position.
Attach blade (C) to the mast (B), extension tube (J), and the lift link (G) as shown.
Unless specified, tighten all fittings and hardware to standard torque.
Illustration 17 g00687600
Check for leaks.Motor Grader in Transport Position
Illustration 18 g06037644
483-5952 Snow Blade and Mounting Gp shown in transport position.
(N5) DO NOT stand beside a snow wing with the moldboard raised into transport position, nor during the process of putting the snow wing into transport position.
(N6) Stand at the rear of the motor grader during the connection of the transport cable.
(C) 275-5875 Blade Gp
(F) 499-3075 Mounting Bracket Gp
(H) 458-9643 Mounting Bracket Gp
(J) 468-1682 Extension Tube Gp
Illustration 19 g06037878
Connection of the transport cable from the extension tube with 483-5952 Snow Blade and Mounting Gp in transport position.
(C) 275-5875 Blade Gp
(F) 499-3075 Mounting Bracket Gp
(H) 458-9643 Mounting Bracket Gp
(J) 468-1682 Extension Tube Gp