4526586 CYLINDER HEAD GP Caterpillar parts
Rating:
Alternative (cross code) number:
CA4526586
452-6586
4526586
CA4526586
452-6586
4526586
Number on catalog scheme:
2
For full view, you need register
Information:
Removal Procedure
Start By:
Remove the fan. Refer to Disassembly and Assembly, "Fan - Remove and Install".
Remove the alternator. Refer to Disassembly and Assembly, "Alternator - Remove".
Remove the crankshaft pulley. Refer to Disassembly and Assembly, "Crankshaft Pulley - Remove and Install".
Remove the engine oil pan. Refer to Disassembly and Assembly, "Engine Oil Pan - Remove and Install".
Remove the timing gears. Refer to Disassembly and Assembly, "Gear Group (Front) - Remove and Install".
Remove the fuel injection pump. Refer to Disassembly and Assembly, "Fuel Injection Pump - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Dispose of all fluids according to local regulations and mandates.
Ensure that the coolant is drained into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change" for the correct procedure.
Illustration 1 g01337982
Typical example
Remove bolts (1) that secure bypass tube (2) to front housing (3). Note the position of any brackets that are secured by the bolts. Remove bypass tube (2). Remove O-ring seals (4) and (5) from bypass tube (2).
Illustration 2 g03663329
If the engine is equipped with a heavy duty idler gear. Remove plate (6). Refer to Disassembly and Assembly, "Idler Gear - Remove" for the correct procedure.
Illustration 3 g01350336
Typical example
Remove bolts (8), (9) and (10) from front housing (3). Note: The bolts are three different lengths. Note the positions of the different bolts.
Remove front housing (3) from the cylinder block.
Remove joint (7).
Illustration 4 g01350337
Typical example
Remove thrust washer (11) from the cylinder block.
Start By:
Remove the fan. Refer to Disassembly and Assembly, "Fan - Remove and Install".
Remove the alternator. Refer to Disassembly and Assembly, "Alternator - Remove".
Remove the crankshaft pulley. Refer to Disassembly and Assembly, "Crankshaft Pulley - Remove and Install".
Remove the engine oil pan. Refer to Disassembly and Assembly, "Engine Oil Pan - Remove and Install".
Remove the timing gears. Refer to Disassembly and Assembly, "Gear Group (Front) - Remove and Install".
Remove the fuel injection pump. Refer to Disassembly and Assembly, "Fuel Injection Pump - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Dispose of all fluids according to local regulations and mandates.
Ensure that the coolant is drained into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change" for the correct procedure.
Illustration 1 g01337982
Typical example
Remove bolts (1) that secure bypass tube (2) to front housing (3). Note the position of any brackets that are secured by the bolts. Remove bypass tube (2). Remove O-ring seals (4) and (5) from bypass tube (2).
Illustration 2 g03663329
If the engine is equipped with a heavy duty idler gear. Remove plate (6). Refer to Disassembly and Assembly, "Idler Gear - Remove" for the correct procedure.
Illustration 3 g01350336
Typical example
Remove bolts (8), (9) and (10) from front housing (3). Note: The bolts are three different lengths. Note the positions of the different bolts.
Remove front housing (3) from the cylinder block.
Remove joint (7).
Illustration 4 g01350337
Typical example
Remove thrust washer (11) from the cylinder block.
Caterpillar SIS machinery equipment:
Caterpillar SIS
AP1055 F Asphalt Paver RLM00001-UP (MACHINE) POWERED BY C7.1 Engine »
452-6586
CYLINDER HEAD GP
AP600F, AP655F Asphalt Paver LR600001-UP (MACHINE) POWERED BY C7.1 Engine »
452-6586
CYLINDER HEAD GP
D5R2 XL, LGP Track-Type Tractor WDZ00001-UP (MACHINE) POWERED BY C7.1 Engine »
452-6586
CYLINDER HEAD GP
D5R2 XL Track-Type Tractor R5A00001-UP (MACHINE) POWERED BY C7.1 Engine »
452-6586
CYLINDER HEAD GP
CS56B, CP56B Vibratory Soil Compactor 50700001-UP (MACHINE) POWERED BY C7.1 Engine »
452-6586
CYLINDER HEAD GP
962M Wheel Loader RCL00001-UP (MACHINE) POWERED BY C7.1 Engine »
452-6586
CYLINDER HEAD GP
CS56B, CP56B Vibratory Soil Compactor M5600001-UP (MACHINE) POWERED BY C7.1 Engine »
452-6586
CYLINDER HEAD GP
CS74B, CP74B Vibratory Soil Compactor 51200001-UP (MACHINE) POWERED BY C7.1 Engine »
452-6586
CYLINDER HEAD GP
CS68B, CP68B Vibratory Soil Compactor 50900001-UP (MACHINE) POWERED BY C7.1 Engine »
452-6586
CYLINDER HEAD GP
CS68B, CP68B Vibratory Soil Compactor CM600001-UP (MACHINE) POWERED BY C7.1 Engine »
452-6586
CYLINDER HEAD GP
CS74B, CP74B Vibratory Soil Compactor B7M00001-UP (MACHINE) POWERED BY C7.1 Engine »
452-6586
CYLINDER HEAD GP
CS78B Vibratory Soil Compactor 51300001-UP (MACHINE) POWERED BY C7.1 Engine »
452-6586
CYLINDER HEAD GP
CS78B, CS79B Vibratory Soil Compactor CM700001-UP (MACHINE) POWERED BY C7.1 Engine »
452-6586
CYLINDER HEAD GP
CP76B Vibratory Soil Compactor J7600001-UP (MACHINE) POWERED BY C7.1 Engine »
452-6586
CYLINDER HEAD GP
DE165E3, DE175E3, DE20 Generator Set STZ00001-UP POWERED BY C7.1 Engine »
452-6586
CYLINDER HEAD GP
C7.1 D135,D150,D175 Generator Set TXR00001-UP »
452-6586
CYLINDER HEAD GP
C7.1 D125, D150 ,D175 Generator Set TX900001-UP »
452-6586
CYLINDER HEAD GP
D6K XL, LGP Track-Type Tractor 6S600001-UP (MACHINE) POWERED BY C7.1 Engine »
452-6586
CYLINDER HEAD GP
D6K Track-Type Tractor MP700001-UP (MACHINE) POWERED BY C7.1 »
452-6586
CYLINDER HEAD GP
930K ADL (Air Deployable Loader) HEG00001-UP (MACHINE) POWERED BY C7.1 Engine »
452-6586
CYLINDER HEAD GP
953K Track-Type Loader JNR00001-UP (MACHINE) POWERED BY C7.1 Engine »
452-6586
CYLINDER HEAD GP
323 Excavator YBL00001-UP (MACHINE) POWERED BY C7.1 Engine »
452-6586
CYLINDER HEAD GP
326D2 L Excavator KER00001-UP (MACHINE) POWERED BY C7.1 Engine »
452-6586
CYLINDER HEAD GP
326D2 L Excavator JFG00001-UP (MACHINE) POWERED BY C7.1 Engine »
452-6586
CYLINDER HEAD GP
326D2 L Excavator LJE00001-UP (MACHINE) POWERED BY C7.1 Engine »
452-6586
CYLINDER HEAD GP
PL61 Pipelayer FNZ00001-UP (MACHINE) »
452-6586
CYLINDER HEAD GP
PL61 Pipelayer 6P200001-UP (MACHINE) »
452-6586
CYLINDER HEAD GP
330D2 L Excavator EBP00001-UP (MACHINE) POWERED BY C7.1 Engine »
452-6586
CYLINDER HEAD GP
330D2 L Excavator FEX00001-UP (MACHINE) POWERED BY C7.1 Engine »
452-6586
CYLINDER HEAD GP
323 Excavator DWF00001-UP (MACHINE) POWERED BY C7.1 Engine »
452-6586
CYLINDER HEAD GP
323 Excavator BR900001-UP (MACHINE) POWERED BY C7.1 Engine »
452-6586
CYLINDER HEAD GP
320 Excavator YBP00001-UP (MACHINE) POWERED BY C7.1 Engine »
452-6586
CYLINDER HEAD GP
336 GC Excavator JFW00001-UP (MACHINE) POWERED BY C7.1 Engine »
452-6586
CYLINDER HEAD GP
330 & 330 GC Excavators FEK00001-UP (MACHINE) POWERED BY C7.1 Engine »
452-6586
CYLINDER HEAD GP
120 Motor Grader E9400001-UP (MACHINE) POWERED BY C7.1 Engine »
452-6586
CYLINDER HEAD GP
120 Motor Grader E9200001-UP (MACHINE) POWERED BY C7.1 Engine »
452-6586
CYLINDER HEAD GP
120 AWD Motor Grader E9300001-UP (MACHINE) POWERED BY C7.1 Engine »
452-6586
CYLINDER HEAD GP
120 AWD Motor Grader E9500001-UP (MACHINE) POWERED BY C7.1 Engine »
452-6586
CYLINDER HEAD GP
140 GC Motor Grader W9200001-UP (MACHINE) POWERED BY C7.1 Engine »
452-6586
CYLINDER HEAD GP
C7.1 Industrial Engine G9200001-UP »
452-6586
CYLINDER HEAD GP
323 Excavator KTY00001-UP (MACHINE) POWERED BY C7.1 Engine »
452-6586
CYLINDER HEAD GP
120 Motor Grader E9600001-UP (MACHINE) POWERED BY C7.1 Engine »
452-6586
CYLINDER HEAD GP
C7.1 Industrial Engine 77000001-UP »
452-6586
CYLINDER HEAD GP
525D WHEEL SKIDDER 2L500001-UP (MACHINE) POWERED BY C7.1 Engine »
452-6586
CYLINDER HEAD GP
924K Small Wheel Loader ENC00001-UP (MACHINE) POWERED BY C7.1 Engine »
452-6586
CYLINDER HEAD GP
924K Small Wheel Loader HJF00001-UP (MACHINE) POWERED BY C7.1 Engine »
452-6586
CYLINDER HEAD GP
930K Small Wheel Loader DYB00001-UP (MACHINE) POWERED BY C7.1 Engine »
452-6586
CYLINDER HEAD GP
930K Small Wheel Loader EYE00001-UP (MACHINE) POWERED BY C7.1 Engine »
452-6586
CYLINDER HEAD GP
938K Small Wheel Loader HFW00001-UP (MACHINE) POWERED BY C7.1 Engine »
452-6586
CYLINDER HEAD GP
938K Small Wheel Loader XXT00001-UP (MACHINE) POWERED BY C7.1 Engine »
452-6586
CYLINDER HEAD GP
C7.1 Industrial Engine G9R00001-UP »
452-6586
CYLINDER HEAD GP
930K Military Fork Lift TNY00001-UP (MACHINE) »
452-6586
CYLINDER HEAD GP
938K Small Wheel Loader W8K00001-UP (MACHINE) POWERED BY C7.1 Engine »
452-6586
CYLINDER HEAD GP
930K Small Wheel Loader FRK00001-UP (MACHINE) POWERED BY C7.1 Engine »
452-6586
CYLINDER HEAD GP
924K Small Wheel Loader SNZ00001-UP (MACHINE) POWERED BY C7.1 Engine »
452-6586
CYLINDER HEAD GP
938K Small Wheel Loader REP00001-UP (MACHINE) POWERED BY C7.1 Engine »
452-6586
CYLINDER HEAD GP
924K Small Wheel Loader KW400001-UP (MACHINE) POWERED BY C7.1 Engine »
452-6586
CYLINDER HEAD GP
D6K2 TRACK-TYPE TRACTOR RPR00001-UP (MACHINE) POWERED BY C7.1 Engine »
452-6586
CYLINDER HEAD GP
320D2 FOREST MACHINE BW200001-UP (MACHINE) POWERED BY C7.1 Engine »
452-6586
CYLINDER HEAD GP
320D2 LOG LOADER FOREST MACHINE CY200001-UP (MACHINE) POWERED BY C7.1 Engine »
452-6586
CYLINDER HEAD GP
C7.1 Generator Set D175, D150, D135, and D125 ETG00001-UP »
452-6586
CYLINDER HEAD GP
326D2 & 326D2 L Excavators KGY00001-UP (MACHINE) POWERED BY C7.1 Engine »
452-6586
CYLINDER HEAD GP
329D2 & 329D2 L Excavators RGA00001-UP (MACHINE) POWERED BY C7.1 Engine »
452-6586
CYLINDER HEAD GP
326D2 L Excavator REC00001-UP (MACHINE) POWERED BY C7.1 Engine »
452-6586
CYLINDER HEAD GP
326D2 L Excavators JFL00001-UP (MACHINE) POWERED BY C7.1 Engine »
452-6586
CYLINDER HEAD GP
329D2 & 329D2 L Excavators SHJ00001-UP (MACHINE) POWERED BY C7.1 Engine »
452-6586
CYLINDER HEAD GP
M320D2 Wheeled Excavator EN800001-UP (MACHINE) POWERED BY C7.1 Engine »
452-6586
CYLINDER HEAD GP
330D2 L Excavators PTE00001-UP (MACHINE) POWERED BY C7.1 Engine »
452-6586
CYLINDER HEAD GP
330D2 L Excavator SZK00001-UP (MACHINE) POWERED BY C7.1 Engine »
452-6586
CYLINDER HEAD GP
326D2 L Excavator MZH00001-UP (MACHINE) POWERED BY C7.1 Engine »
452-6586
CYLINDER HEAD GP
930K Small Wheel Loader P3K00001-UP (MACHINE) POWERED BY C7.1 Engine »
452-6586
CYLINDER HEAD GP
Cat SIS web machinery list:
Parts cylinder Caterpillar catalog:
4526584
CYLINDER HEAD GP
Caterpillar
Caterpillar
4526582
CYLINDER HEAD GP
Caterpillar
Caterpillar
4259673
CYLINDER BLOCK GP-SHORT
Caterpillar
Caterpillar
4188809
CYLINDER AR-HYDRAULIC
Caterpillar
Caterpillar
4188808
CYLINDER AR-HYDRAULIC
Caterpillar
Caterpillar
4188807
CYLINDER & SEAL GP-BUCKET
Caterpillar
Caterpillar
4868554
CYLINDER AS
Caterpillar
Caterpillar
4860797
CYLINDER AS
Caterpillar
Caterpillar
4855428
CYLINDER HEAD GP
Caterpillar
Caterpillar
4782321
CYLINDER BLOCK GP-SHORT
Caterpillar
Caterpillar
4760696
CYLINDER BLOCK GP-SHORT
Caterpillar
Caterpillar
4732679
CYLINDER & LINES GP-BUCKET
Caterpillar
Caterpillar