4781347 CYLINDER GP-BOOM Caterpillar parts
Rating:
Alternative (cross code) number:
CA4781347
478-1347
4781347
CA4781347
478-1347
4781347
Weight: 149 pounds 67 kg.
Information:
Hot oil and hot components can cause personal injury. Do not allow hot oil or hot components to contact skin.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
If the oil becomes contaminated, premature component failure could result. Contaminated oil can also contribute to overheating. Use the following procedure to sample the oil in the system:
Start the engine and run the engine at high rpm. Allow the oil temperature to reach the normal operating temperature.
To circulate the oil, move the Steering Transmission Integrated Control (STIC) repeatedly through all travel positions and depress the brake pedal repeatedly.
Run the engine at low idle. Note: Make sure that the STIC steering control lever is in the LOCKED position. Do not operate the Steering Transmission Integrated Control (STIC) or the brakes.
Illustration 1 g02708117
Left side view
Illustration 2 g02707996
Location of pilot oil pump
Drain 50 mL (1.7 fl oz) of oil from the sampling valve on the pilot oil pump for the steering system in order to clean out the sampling valve. Properly dispose of the oil.
Draw another 50 mL (1.7 fl oz) of oil from the sampling valve for analysis. The level of contaminants must be lower than the values in the following table:
Table 1
Hydraulic Oil Contamination
Particle Size (Microns) Maximum Number of Particles
10 to 20 48000
21 to 50 2580
51 to 100 150
100 or more 20 Note: For additional information about taking a good oil sample, refer to Special Publication, PEHP6001, "How To Take A Good Oil Sample" for the machine that is being tested.
Caterpillar SIS machinery equipment:
Caterpillar SIS
426F2 Backhoe Loader Side Shift EJ400001-UP (MACHINE) POWERED BY C4.4 Engine »
478-1347
CYLINDER GP-BOOM
426F2 Backhoe Loader Side Shift EJ200001-UP (MACHINE) POWERED BY C4.4 Engine »
478-1347
CYLINDER GP-BOOM
426F2 Backhoe Loader Side Shift DJ400001-UP (MACHINE) POWERED BY C4.4 Engine »
478-1347
CYLINDER GP-BOOM
424B2 Backhoe Loader Side Shift JTH00001-UP (MACHINE) »
478-1347
CYLINDER GP-BOOM
424B Backhoe Loader Side Shift JRN00001-UP (MACHINE) »
478-1347
CYLINDER GP-BOOM
424B HD Backhoe Loader JRY00001-UP (MACHINE) »
478-1347
CYLINDER GP-BOOM
Caterpillar parts catalog:
Parts cylinder Caterpillar catalog:
4781346
CYLINDER GP-STICK
Caterpillar
Caterpillar
4781345
CYLINDER GP-BACKHOE BUCKET
Caterpillar
Caterpillar
4645078
CYLINDER AS-HYDRAULIC
Caterpillar
Caterpillar
4636991
CYLINDER GP-LIFT
Caterpillar
Caterpillar
4495443
CYLINDER AS
Caterpillar
Caterpillar
4495429
CYLINDER GP-BACKHOE BUCKET
Caterpillar
Caterpillar
4785185
CYLINDER & MTG GP-TILT
Caterpillar
Caterpillar
4781352
CYLINDER GP-STEERING
Caterpillar
Caterpillar
4781351
CYLINDER GP-TILT
Caterpillar
Caterpillar
4781350
CYLINDER GP-LIFT
Caterpillar
Caterpillar
4781349
CYLINDER GP-SWING
Caterpillar
Caterpillar
4781348
CYLINDER GP-STABILIZER
Caterpillar
Caterpillar