CYLINDER-HYD 4784034 - Caterpillar

Illustration 1 g00691675
FLOAT (1) - Push the joystick forward into the detent. The bucket will lower to the ground. The bucket will follow the contour of the ground. The joystick will remain in the FLOAT position until the joystick is pulled out of the detent. The joystick will return to the HOLD position when the joystick is released.
LOWER (2) - Push the joystick forward in order to lower the bucket. The joystick will return to the HOLD position when the joystick is released.
HOLD (3) - The joystick will return to the HOLD position when the single lever control is released from the RAISE position or from the LOWER position. The bucket will remain in the selected position.
RAISE (4) - Pull the joystick backward in order to raise the bucket. Release the joystick in order to stop lifting the bucket. The joystick will return to the HOLD position when the joystick is released. The joystick is detented in the fully raised position. The joystick will stay in the detent and the bucket will continue to rise until the bucket reaches the lift kickout height. Then, the joystick will return to the HOLD position.
DUMP (5) - Move the joystick toward the right in order to dump a load from the bucket.
QUICK DUMP (6) - Move the joystick all the way to the right. This will shorten the time that is required to tilt the bucket forward.
TILT BACK (7) - Move the joystick toward the left in order to tilt the bucket backward. The joystick is detented in the TILT BACK position. The joystick will remain in the TILT BACK position until the bucket reaches the angle that is set by the kickout.