CYLINDER AS 4933133 - Caterpillar

Illustration 1 g00291566
Cylinder and valve locations (A) Inlet valves (B) Exhaust valves
Table 1
C32 Generator Set Engine Specifications    
    C32    
Cylinders and Arrangement     12 cylinder vee block    
Bore     145 mm (5.7 inch)    
Stroke    
162 mm (6.4 inch)    
Compression Ratio     15:1    
Aspiration     TA (1)    
Displacement    
32 L (1953 in3)    
Firing Order     1-10-9-6-5-12-11-4-3-8-7-2    
Rotation (flywheel end)     Counterclockwise    
( 1 ) Turbocharged AftercooledGenerator Description
The SR4B brushless generator is used with the following loads: mixed loads of motors and lights, SCR-controlled equipment, computer centers, installations of communications and petroleum drilling applications. The elimination of the brushes in the field circuit reduces maintenance. The elimination of the brushes in the field circuit increases reliability. The elimination of brushes provides a higher degree of protection in potentially hazardous atmospheres.The generator set packages can be utilized for prime power generation or standby power generation. The generator set packages can be used in land-based applications.SR4B generators are utilized in three-phase full-wave excitation and regulation. The generators are four-pole generators with four, six, ten, or twelve lead configurations that are dependent on frame size. The generators are capable of producing electrical power in either 50 Hz or 60 Hz applications.Power Module Enclosure
Basic Container
The enclosure for the power module is a shipping container that is mounted to an undercarriage chassis. The container meets the following standards and regulations:
ISO/TC 104 Requirements for cargo containers
ANSI/MH5.1 Basic requirements for cargo containers
ANSI/MH5.1.1 Requirements for closed van containersVertical Discharge Panel
Illustration 2 g01297394
Vertical discharge panelThe vertical discharge panel is installed in power modules that are equipped with vertical radiators. The panel directs hot air from the radiator and engine exhaust through an opening in the roof. This helps direct the hot air away from the surrounding area of the power module.Fire Extinguishers
Fire extinguishers and fire suppression systems are available as an option.Louvers
Louvers are installed in the power module in order to receive fresh air. The louvers are sized in order to meet the inlet air supply that is required for the power module. The louvers allow fresh air to enter the power module that is needed for the engine air inlet and for radiator cooling during full load.There are louvers that can be opened and closed manually. There are also louvers that can be opened or closed automatically. The louvers that are operated manually require the operator to open the louvers before the operation of the power module and the louvers that are operated manually require the operator to close the louvers after the operation of the power module. Automatic louvers are opened and closed by 24 volt electric actuators. The electric actuators will open the louvers when the engine is started. The electric actuators will close the louvers when the engine is stopped.Fuel Storage and Fuel Delivery
XQ1000 Fuel tank
A 4732 L (1250 US gal) fuel tank is mounted in the front of the power module. The fuel tank can supply fuel for the engine for approximately 19