CYLINDER & LINES GP-BOOM 4944966 - Caterpillar

Illustration 1 g01930053
Table 1
Specification for the 166-4357 Accessory Drive Gp and 334-5306 Accessory Drive Gp
Item Qty Part Specification Description
1 - - Lightly lubricate the bore of the O-ring seals with the lubricant that is being sealed or with the approved equivalent.
2 2 7N-7539 Thrust Washer Thickness of the new thrust washer is 8.50 0.05 mm (0.335 0.002 inch).
3 1 7N-5874 Auxiliary Drive Shaft Diameter of new auxiliary drive shaft is 74.900 0.015 mm (2.9488 0.0006 inch).
Width of groove in the new auxiliary drive shaft is 8.750 0.025 mm (0.3445 0.0010 inch).
4 1 7N-5279 Adapter As During assembly, align the hole in the sleeve bearing with the adapter.
Bore in the sleeve bearing of the adapter assembly after installation is 75.000 0.055 mm (2.9527 0.0022 inch).
5 1 7C-4165 Adapter As Bore in the sleeve bearing of the adapter assembly after installation is 75.000 0.055 mm (2.9527 0.0022 inch).