4975505 CYLINDER HEAD GP Caterpillar parts
Rating:
Alternative (cross code) number:
CA4975505
497-5505
4975505
CA4975505
497-5505
4975505
Weight: 297 pounds 134 kg.
Related part:
4975505
HEAD GP-CYL -UTN
20R1383
R
Information:
Introduction
The problem that is identified below does not have a known permanent solution. Until a permanent solution is known, use the solution that is identified below.Problem
If the engine is stored for 6 months or more, the fuel injection pump linkage needs to be lubricated.Solution
Follow the procedure in this article to lubricate the fuel injection pump linkage.
Remove the fuel shutoff solenoid. Refer to Disassembly and Assembly, "Fuel Shutoff Solenoid - Remove and Install" for the correct procedure.
Spray the fuel control rack with a suitable lubricant spray.
Use a suitable magnet to operate the fuel control rack. The operation of the fuel control rack will disperse the lubricant.Note: If the fuel control rack does not move freely, then the fuel injection pump should be replaced. Refer to Disassembly and Assembly, "Fuel Injection Pump - Remove and Install" for the correct procedure.
Install the fuel shutoff solenoid. Refer to Disassembly and Assembly, "Fuel Shutoff Solenoid - Remove and Install" for the correct procedure.
Record the repair in the Service Information Management System (SIMSi), including the engine/machine serial number and the date of the repair.
The problem that is identified below does not have a known permanent solution. Until a permanent solution is known, use the solution that is identified below.Problem
If the engine is stored for 6 months or more, the fuel injection pump linkage needs to be lubricated.Solution
Follow the procedure in this article to lubricate the fuel injection pump linkage.
Remove the fuel shutoff solenoid. Refer to Disassembly and Assembly, "Fuel Shutoff Solenoid - Remove and Install" for the correct procedure.
Spray the fuel control rack with a suitable lubricant spray.
Use a suitable magnet to operate the fuel control rack. The operation of the fuel control rack will disperse the lubricant.Note: If the fuel control rack does not move freely, then the fuel injection pump should be replaced. Refer to Disassembly and Assembly, "Fuel Injection Pump - Remove and Install" for the correct procedure.
Install the fuel shutoff solenoid. Refer to Disassembly and Assembly, "Fuel Shutoff Solenoid - Remove and Install" for the correct procedure.
Record the repair in the Service Information Management System (SIMSi), including the engine/machine serial number and the date of the repair.
Caterpillar SIS machinery equipment:
Caterpillar SIS
C9.3 Marine Engine CA900001-UP »
497-5505
CYLINDER HEAD GP
C9.3 Marine Generator Set C9300001-UP »
497-5505
CYLINDER HEAD GP
C9 Industrial Engine C9N00001-UP »
497-5505
CYLINDER HEAD GP
CX31-P600-C9I Petroleum Package C9N00001-UP »
497-5505
CYLINDER HEAD GP
C9.3 Marine Engine CP900001-UP »
497-5505
CYLINDER HEAD GP
Caterpillar parts catalog:
Parts cylinder Caterpillar catalog:
4932775
CYLINDER HEAD AS
Caterpillar
Caterpillar
4687809
CYLINDER BLOCK AS
Caterpillar
Caterpillar
4679315
CYLINDER HEAD GP
Caterpillar
Caterpillar
4677546
CYLINDER HEAD GP
Caterpillar
Caterpillar
4676780
CYLINDER HEAD GP
Caterpillar
Caterpillar
4636474
CYLINDER BLOCK GP
Caterpillar
Caterpillar
5026507
CYLINDER HEAD GP
Caterpillar
Caterpillar
5018553
CYLINDER HEAD GP
Caterpillar
Caterpillar
5018549
CYLINDER BLOCK GP
Caterpillar
Caterpillar
5014344
CYLINDER HEAD GP
Caterpillar
Caterpillar
5014341
CYLINDER BLOCK GP
Caterpillar
Caterpillar
4983110
CYLINDER HEAD GP
Caterpillar
Caterpillar