4Q7100 CYLINDER HEAD GP Caterpillar parts
3116
Rating:
Alternative (cross code) number:
CA4Q7100
4Q-7100
4Q7100
CA4Q7100
4Q-7100
4Q7100
TRUCK ENGINE,
Compatible equipment models: 4Q7100:
Number on catalog scheme:
For full view, you need register
Information:
parking brake uses the following components:
Transmission Electronic Control Module
Parking Brake Switch
Parking Brake AlarmThe parking brake switch alerts the control module of the status of the parking brake. The brake can be applied or the brake can be released.The machine will remain in neutral under the following conditions. The parking brake is applied and the machine is placed in gear. The machine is in gear and you apply the parking brake.The shift lever must be shifted back to the NEUTRAL position and the parking brake released in order to resume normal operation.The parking brake is applied and the shift lever is in the NEUTRAL position. The machine is shifted back into gear within 3 seconds. The machine will be placed into gear. The parking brake alarm relay will energize. A parking brake abuse event will be logged in the control module. Releasing the parking brake will silence the alarm. This leaves the machine in normal operation. The alarm is also silenced when the machine is in neutral.The shift lever transmission control must be cycled into gear and the shift lever must be cycled out of gear twice before the machine is placed in gear.The transmission does not shift into neutral when the parking brake is applied.No other problems are indicated by the shift lever transmission control and no other problems are indicated by the transmission electronic control module. Examine the following areas:
Inspect the wiring harness connectors for loose connections.
Test the parking brake switch for proper operation.
Verify the alignment of the parking brake switch and the parking brake lever.Note: The parking brake switch is actuated by the parking brake handle. The parking brake switch is located by the parking brake lever within the right hand console.
Inspect the wiring that is between the parking brake switch and the transmission electronic control module.
Inspect the wiring that is between the parking brake switch and the ground.
Verify the voltage to the transmission electronic control module.
Verify the ground to the transmission electronic control module.When the parking brake switch is in the OFF position, the control module's contact 3 receives an open. When the parking brake switch is in the ON position, the control module's contact 3 receives a ground.Note: The shift lever transmission control can override the parking brake switch. The machine can be operated when the parking brake is applied. If the machine is operated and the parking brake is applied, an event code is logged. The "Parking Brake Abuse" event is logged in the transmission electronic control module.
Transmission Electronic Control Module
Parking Brake Switch
Parking Brake AlarmThe parking brake switch alerts the control module of the status of the parking brake. The brake can be applied or the brake can be released.The machine will remain in neutral under the following conditions. The parking brake is applied and the machine is placed in gear. The machine is in gear and you apply the parking brake.The shift lever must be shifted back to the NEUTRAL position and the parking brake released in order to resume normal operation.The parking brake is applied and the shift lever is in the NEUTRAL position. The machine is shifted back into gear within 3 seconds. The machine will be placed into gear. The parking brake alarm relay will energize. A parking brake abuse event will be logged in the control module. Releasing the parking brake will silence the alarm. This leaves the machine in normal operation. The alarm is also silenced when the machine is in neutral.The shift lever transmission control must be cycled into gear and the shift lever must be cycled out of gear twice before the machine is placed in gear.The transmission does not shift into neutral when the parking brake is applied.No other problems are indicated by the shift lever transmission control and no other problems are indicated by the transmission electronic control module. Examine the following areas:
Inspect the wiring harness connectors for loose connections.
Test the parking brake switch for proper operation.
Verify the alignment of the parking brake switch and the parking brake lever.Note: The parking brake switch is actuated by the parking brake handle. The parking brake switch is located by the parking brake lever within the right hand console.
Inspect the wiring that is between the parking brake switch and the transmission electronic control module.
Inspect the wiring that is between the parking brake switch and the ground.
Verify the voltage to the transmission electronic control module.
Verify the ground to the transmission electronic control module.When the parking brake switch is in the OFF position, the control module's contact 3 receives an open. When the parking brake switch is in the ON position, the control module's contact 3 receives a ground.Note: The shift lever transmission control can override the parking brake switch. The machine can be operated when the parking brake is applied. If the machine is operated and the parking brake is applied, an event code is logged. The "Parking Brake Abuse" event is logged in the transmission electronic control module.
Caterpillar SIS machinery equipment:
Caterpillar parts catalog:
Parts cylinder Caterpillar catalog:
30/30, 3116, 3126, 45, 938F, 960F, 962G, DEUCE
1077592
CYLINDER HEAD AS
3116, 320 L, 928F, 953B, IT28F
3116, 320 L, 928F, 953B, IT28F
4P5125
CYLINDER HEAD AS
3116, 320 L, 928F, 953B, IT28F
3116, 320 L, 928F, 953B, IT28F
3116, 320 L, 928F, 953B, IT28F
30/30, 3116, 3126, 45, 938F, 960F, 962G, DEUCE
1193065
CYLINDER HEAD AS
120H, 120H ES, 120H NA, 135H, 135H NA, 3116, 3126, 320 L, 320B, 322 FM L, 322 LN, 322B L, 322B LN, 325, 325 L, 325B L, 45, 561M, 613C II, 928G, 938F, 950F II, 953C, 960F, 963B, 963C, AP-1000, CS-563C,...
120H, 120H ES, 120H NA, 135H, 135H NA, 3116, 3126, 320 L, 320B, 322 FM L, 322 LN, 322B L, 322B LN, 325, 325 L, 325B L, 45, 561M, 613C II, 928G, 938F, 950F II, 953C, 960F, 963B, 963C, AP-1000, CS-563C,...
120H, 120H ES, 120H NA, 135H, 135H NA, 30/30, 3116, 3126, 320B, 322B L, 322B LN, 322C, 325B L, 525B, 533, 535B, 539, 543, 550, 561M, 570, 574, 580, 613C II, 928G, 938F, 938G, 950F, 950F II, 950G, 953C...
6I4088
CYLINDER HEAD GP
3116, 938F, 960F
3116, 938F, 960F
1006289
CYLINDER BLOCK AS
120H, 120H ES, 120H NA, 135H NA, 3116, 325B L, 45, 613C II, 938F, 950F II, 960F, AP-1000, AP-1050, BG-2455C, BG-245C, CB-634C, CS-531C, CS-533C, CS-563C, CS-583C, IT28F, IT38F
120H, 120H ES, 120H NA, 135H NA, 3116, 325B L, 45, 613C II, 938F, 950F II, 960F, AP-1000, AP-1050, BG-2455C, BG-245C, CB-634C, CS-531C, CS-533C, CS-563C, CS-583C, IT28F, IT38F
7W3278
CYLINDER HEAD AS
214B, 224B, 3116, 613C II, 938F, 950F, 950F II, 960F, AP-1000, AP-1050, CB-634C, CP-563, CS-583C, E200B
214B, 224B, 3116, 613C II, 938F, 950F, 950F II, 960F, AP-1000, AP-1050, CB-634C, CP-563, CS-583C, E200B
3116, 938F, 960F, 963B, AP-1000, AP-1000B, AP-1050, AP-1055B, BG-2455C, BG-245C, CB-634C, CP-563, CS-531C, CS-533C, CS-563C, CS-573C, CS-583, CS-583C, D250D
9T7291
CYLINDER GP-STICK
416, 428, 438
416, 428, 438
9T9709
CYLINDER GP-STABILIZER
428, 438
428, 438
4P2471
CYLINDER HEAD GP
3508, 3512, 3516
3508, 3512, 3516
4P2470
CYLINDER HEAD GP
3508, 3512, 3516
3508, 3512, 3516