4T1625 CYLINDER GP Caterpillar parts
D5H
Rating:
Alternative (cross code) number:
CA4T1625
4T-1625
4T1625
CA4T1625
4T-1625
4T1625
Weight: 135 pounds 61 kg.
TRACK-TYPE TRACTOR,
Compatible equipment models: 4T1625:
Information:
Product Identification
Caterpillar Trailer Mounted Pumpers are identified with serial numbers. These numbers are shown on the Serial Number Plate and the Vehicle Identification Plate that are mounted on the pumper.Caterpillar dealers need these numbers in order to determine the components that were included with the pumper. This permits accurate identification of replacement part numbers.
Illustration 1 g00715822
Product Identification Plates
(1) Recommended Fluids and Recommended Filters
(2) OEM Trailer Information Plate
(3) Vehicle Identification Plate
(4) Serial Number Plate The Product Information Plates are located on the left side of the trailer near the front of the trailer.Engine Identification
Caterpillar engines are identified with serial numbers, performance specification numbers, and arrangement numbers. In some of the cases, modification numbers are used. These numbers are shown on the Serial Number Plate and the Information Plate that are mounted on the engine.Caterpillar dealers need these numbers in order to determine the components that were included with the engine. This permits accurate identification of replacement part numbers.Serial Number Plate
Illustration 2 g00735049
(1) Location of the Serial Number Plate The Serial Number Plate is on the left side of the cylinder block near the rear of the engine.
Illustration 3 g00123229The following information is stamped on the Serial Number Plate: engine serial number, model and arrangement number.Information Plate
Illustration 4 g00735050
(1) Location of the Information Plate The Information Plate is on the left side top surface of the cylinder block in front of the front cylinder head.
Illustration 5 g00102789
Typical Information Plate
The following information is stamped on the Information Plate: engine's maximum altitude, horsepower, high idle rpm, full load rpm, fuel settings and other information.Emission Certification Film
The emission certification film (if equipped) is used to verify that the engine meets EPA regulations.
Illustration 6 g00633377
This is a typical example of the emission certification film that is located on the engine.
Caterpillar Trailer Mounted Pumpers are identified with serial numbers. These numbers are shown on the Serial Number Plate and the Vehicle Identification Plate that are mounted on the pumper.Caterpillar dealers need these numbers in order to determine the components that were included with the pumper. This permits accurate identification of replacement part numbers.
Illustration 1 g00715822
Product Identification Plates
(1) Recommended Fluids and Recommended Filters
(2) OEM Trailer Information Plate
(3) Vehicle Identification Plate
(4) Serial Number Plate The Product Information Plates are located on the left side of the trailer near the front of the trailer.Engine Identification
Caterpillar engines are identified with serial numbers, performance specification numbers, and arrangement numbers. In some of the cases, modification numbers are used. These numbers are shown on the Serial Number Plate and the Information Plate that are mounted on the engine.Caterpillar dealers need these numbers in order to determine the components that were included with the engine. This permits accurate identification of replacement part numbers.Serial Number Plate
Illustration 2 g00735049
(1) Location of the Serial Number Plate The Serial Number Plate is on the left side of the cylinder block near the rear of the engine.
Illustration 3 g00123229The following information is stamped on the Serial Number Plate: engine serial number, model and arrangement number.Information Plate
Illustration 4 g00735050
(1) Location of the Information Plate The Information Plate is on the left side top surface of the cylinder block in front of the front cylinder head.
Illustration 5 g00102789
Typical Information Plate
The following information is stamped on the Information Plate: engine's maximum altitude, horsepower, high idle rpm, full load rpm, fuel settings and other information.Emission Certification Film
The emission certification film (if equipped) is used to verify that the engine meets EPA regulations.
Illustration 6 g00633377
This is a typical example of the emission certification film that is located on the engine.
Caterpillar SIS machinery equipment:
Caterpillar SIS
D5H & D5H LGP TRACTOR / POWER SHIFT / 1DD00001-03999 (MACHINE) POWERED BY 3304 ENGINE »
4T-1625
CYLINDER GP
D5H & D5H LGP TRACTORS / DIRECT DRIVE / 7NC00001-03999 (MACHINE) POWERED BY 3304 ENGINE »
4T-1625
CYLINDER GP
D5H & D5H LGP TRACTORS / POWERSHIFT / 3MD00001-UP (MACHINE) POWERED BY 3304 ENGINE »
4T-1625
CYLINDER GP
D5H & D5H LGP TRACTORS / DIRECT DRIVE / 1YD00001-UP (MACHINE) POWERED BY 3304 ENGINE »
4T-1625
CYLINDER GP
Caterpillar parts catalog:
Parts cylinder Caterpillar catalog:
7N6552
CYLINDER BLOCK AS
120G, 130G, 215, 215B, 215C, 215D, 219D, 225, 225D, 229, 229D, 3304, 3304B, 515, 517, 518, 518C, 525, 527, 920, 930, 930R, 936, 936F, 941, 950, 950B, 950B/950E, 951B, 955L, 963, CB-534, CS-643, D4E, D...
120G, 130G, 215, 215B, 215C, 215D, 219D, 225, 225D, 229, 229D, 3304, 3304B, 515, 517, 518, 518C, 525, 527, 920, 930, 930R, 936, 936F, 941, 950, 950B, 950B/950E, 951B, 955L, 963, CB-534, CS-643, D4E, D...
1N3574
CYLINDER BLOCK GP
120G, 130G, 215, 215B, 215C, 215D, 219D, 225, 225D, 229, 229D, 3304, 3304B, 515, 517, 518, 518C, 525, 527, 920, 930, 930R, 936, 936F, 941, 950, 950B, 950B/950E, 951B, 955L, 963, CB-534, D4E, D4E SR, D...
120G, 130G, 215, 215B, 215C, 215D, 219D, 225, 225D, 229, 229D, 3304, 3304B, 515, 517, 518, 518C, 525, 527, 920, 930, 930R, 936, 936F, 941, 950, 950B, 950B/950E, 951B, 955L, 963, CB-534, D4E, D4E SR, D...
7N8874
CYLINDER HEAD GP
120G, 130G, 215, 215B, 215C, 225, 229, 3304, 3304B, 515, 517, 518, 518C, 525, 527, 930R, 936, 936F, CS-643, D4E, D4E SR, D4H, D4H XL, D4HTSK III, D5H, D5H XL, D5HTSK II, E240, FB518, G936
120G, 130G, 215, 215B, 215C, 225, 229, 3304, 3304B, 515, 517, 518, 518C, 525, 527, 930R, 936, 936F, CS-643, D4E, D4E SR, D4H, D4H XL, D4HTSK III, D5H, D5H XL, D5HTSK II, E240, FB518, G936
1N4304
CYLINDER HEAD GP
120G, 130G, 215, 215B, 215C, 225, 3304, 3304B, 515, 517, 518, 518C, 525, 527, 930, 930R, 936, 936F, 950B, 950B/950E, 963, CB-534, D4E, D4E SR, D4H, D4H XL, D4HTSK III, D5H, D5HTSK II, G936
120G, 130G, 215, 215B, 215C, 225, 3304, 3304B, 515, 517, 518, 518C, 525, 527, 930, 930R, 936, 936F, 950B, 950B/950E, 963, CB-534, D4E, D4E SR, D4H, D4H XL, D4HTSK III, D5H, D5HTSK II, G936
9T2716
CYLINDER GP-RIPPER LIFT
D5H, D5H XL, D6H, D6H II, D6H XL, D6H XR, D6M, D6N, D6R, D6R II
D5H, D5H XL, D6H, D6H II, D6H XL, D6H XR, D6M, D6N, D6R, D6R II
6E5401
CYLINDER AS
D5H, D5H XL
D5H, D5H XL
3G6533
CYLINDER AS
D5H, D5H XL
D5H, D5H XL
9T9597
CYLINDER AS
527, D5H, D5H XL, D5HTSK II
527, D5H, D5H XL, D5HTSK II
2829613
CYLINDER GP-TILT
552, 552 2, TK752
552, 552 2, TK752
8X1944
CYLINDER & MTG GP-CENTERSHIFT
12H, 12H ES, 12H NA, 12K, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 160H, 160H ES, 160H NA, 160K, 163H, 163H NA
12H, 12H ES, 12H NA, 12K, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 160H, 160H ES, 160H NA, 160K, 163H, 163H NA
3551028
CYLINDER BLOCK GP
G3512E
G3512E
1625827
CYLINDER GP-BOOM
TK1051
TK1051
1799793
CYLINDER & SEAL GP-BUCKET
320C, 325C, 330C L
320C, 325C, 330C L
3683259
CYLINDER GP-STICK
M313D, M315D 2
M313D, M315D 2
2354809
CYLINDER & GUARD GP
D6R II
D6R II
3545521
CYLINDER BLOCK GP
G3516C, G3516E, PMG3516
G3516C, G3516E, PMG3516
6E1643
CYLINDER GP-BOOM
235C, 235D
235C, 235D
1381994
CYLINDER BLOCK GP
85E, 95E, C-12
85E, 95E, C-12