CYLINDER GP 4T5539 - Caterpillar

Illustration 1 g02795507
Table 1
Specification for 294-1498 Hoe Stick Gp, and 290-9269 Hoe Stick Gp
Item Qty Part Specification Description
All the bores must be free of paint. Use 5P-0960 Grease Cartridge in order to coat all the bores for the pins, the bucket, and the cylinder pin bores.
1 - - Stick cylinder must be assembled in order to orient the grease zerk, as shown in Illustration 1.
2 1 4I-4620 Pin As Diameter is 69.850 0.025 mm (2.7500 0.0010 inch).
3 1 4I-4618 Pin As Diameter is 79.850 0.025 mm (3.1437 0.0010 inch).
4 2 166-1496 Lip Type Seal Lubricate the sealing lip lightly with the lubricant that is being sealed. Install the dust seal so that the lip faces outside, as shown. Install the lip type seals so that the lip type seals do not extend beyond the face of the boss.
5 Bushings are one of the following part numbers:
2 228-5617 Bushing(1) Bore of the bushing before assembly is 100.29 0.04 mm (3.948 0.002 inch).
Installation depth is 9.5 0.8 mm (0.37 0.03 inch).
2 228-5654 Bushing(1) Bore of the bushing before assembly is 100.18 0.02 mm (3.944 0.001 inch).
Installation depth is 9.5 0.8 mm (0.37 0.03 inch).
6 2 235-7679 Lip Type Seal Lubricate the sealing lip lightly with the lubricant that is being sealed. Install the dust seal so that the lip faces outside, as shown. Install the lip type seals so that the lip type seals do not extend beyond the face of the boss.
7 2 166-1495 Lip Type Seal Lubricate the sealing lip lightly with the lubricant that is being sealed. Install the dust seal so that the lip faces outside, as shown. Install the lip type seals so that the lip type seals do not extend beyond the face of the boss.
8 2 228-5614 Bushing(1) Bore of the bushing before assembly is 70.17 0.04 mm (2.763 0.002 inch).
Installation depth is 9.5 0.8 mm (0.37 0.03 inch).
9 2 228-5615 Bushing(1) Bore of the bushing before assembly is 90.25 0.04 mm (3.553 0.002 inch).
Installation depth is 9.5 0.8 mm (0.37 0.03 inch).
(1) Install the bushing in the bore so that the part number of the bushing is facing outward.