CYLINDER GP-RIPPER 5218420 - Caterpillar

Installation Procedure
Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts. Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement.
Illustration 1 g00999500
Attach a suitable lifting device to final drive (1). The weight of final drive (1) is approximately 272 kg (600 lb).
Use pry bars (3) in order to balance final drive (1). Install final drive (1). Install nuts (2). Tighten nuts (2) to a torque of 430 60 N m (317 44 lb ft).
Fill the power train oil system. The capacity of the power train system is 47 L (12 US gal). End By:
Install the tandem housing. Refer to Disassembly and Assembly, "Tandem Housing - Install".