CYLINDER GP-BOOM 6E0109 - Caterpillar

Installation Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     8S-7640     Stand     2    
8S-7611 Tube     2    
8S-7615 Pin     2    
B     1U-9760     Jack Stand     2    
C     1U-7505     Transmisson Jack     1    
D     1U-7558     Mounting Brackets     2    
Illustration 1 g00760898
Use tooling (C) and (D) in order to place transmission (13). Install four bolts (14). The weight of transmission (13) is 227 kg (500 lb).
Illustration 2 g00760897
Install twelve bolts (12) .
Illustration 3 g00760896
Connect wires (10) and (11) .
Illustration 4 g00760895
Connect line (9) .
Illustration 5 g00760894
Connect line (8) .
Illustration 6 g00760893
Install plug (6) .
Install two bolts (7) .
Illustration 7 g00760892
Connect three electrical connectors (5) and install the strap.
Illustration 8 g00760891
Connect seven electrical connectors (3). Install three straps (4) .
Illustration 9 g00760890
Remove tooling (B) from front axle (2) .
Illustration 10 g00760888
Remove tooling (A) from rear frame (1) .
Fill the transmission with oil. Refer to Operation and Maintenance, SEBU7399, "Capacities" for the proper capacity., End By:
Install the front drive shaft. Refer to Disassembly and Assembly, "Drive Shaft (Front) - Remove and Install".
Install the rear drive shaft. Refer to Disassembly and Assembly, "Drive Shaft (Rear) - Remove and Install".
Install the piston pump. Refer to Disassembly and AssemblyRENR3585, "Piston Pump (Implement and Steering) - Install".