6E5918 CYLINDER GP-TILT Caterpillar parts
910E, 910G, 914G, IT14G2
Rating:
Alternative (cross code) number:
CA6E5918
6E-5918
6E5918
CA6E5918
6E-5918
6E5918
Weight: 110 pounds 49 kg.
Information:
BORE DIAMETER
101.6
mm
CLOSED LENGTH
990
mm
PIN SIZE CAP END
57.15
mm
PIN SIZE ROD EYE
57.15
mm
ROD DIAMETER
57.15
mm
STROKE
400
TYPE
THD GLAND
COMPACT WHEEL LOADER, INTEGRATED TOOLCARRIER,
Compatible equipment models: 6E5918:
Number on catalog scheme:
For full view, you need register
Information:
The procedure that follows is not to be used on cylinder heads, fuel system housings, inlet and exhaust manifolds or hydraulic system components.
To start, put a mark on the area in which the plug will be used. Use a center punch to make a small hole in the castings to start the drill. Drill and tap the hole to the correct size for the pipe plug to be used. Put 6V1541 Quick Cure Primer on both the threads of the pipe plug and the tapped hole. Put 9S3265 Retaining Compound on the threads of the pipe plug. Install the pipe plug and tighten it to the correct torque. See Illustration 1.
Illustration 1. Installation of pipe plug.The pipe plug must be long enough to be above the front and back surfaces of the casting wall to make sure of the correct thread engagement. Grind the top of the pipe plug even with the casting surface. See Illustration 2. Put paint on the ground surface.
Illustration 2. Grind pipe plug even with casting surface.
Caterpillar SIS machinery equipment:
Caterpillar SIS
910F WHEEL LOADER 1SF01104-UP (MACHINE) POWERED BY 3114 ENGINE »
6E-5918
CYLINDER GP-TILT
914G Wheel Loader 7ZM00001-00439 (MACHINE) POWERED BY 3054 Engine »
6E-5918
CYLINDER GP-TILT
910G Wheel Loader AKR00001-UP (MACHINE) POWERED BY 3064 Engine »
6E-5918
CYLINDER GP-TILT
914G Wheel Loader 7ZM00440-UP (MACHINE) POWERED BY 3054 Engine »
6E-5918
CYLINDER GP-TILT
914G Wheel Loader PDF00001-UP (MACHINE) POWERED BY 3054C Engine »
6E-5918
CYLINDER GP-TILT
914G2 Compact Wheel Loader and IT14G2 Integrated Tool Carrier ERP00001-UP (MACHINE) POWERED BY C4.4 Engine »
6E-5918
CYLINDER GP-TILT
Caterpillar parts catalog:
Parts cylinder Caterpillar catalog:
910E, IT12B, IT14F
910E, IT12B, IT14F
1648342
CYLINDER AS
910G
910G
1648340
CYLINDER AS
910G
910G
1792915
CYLINDER AS
IT14G, IT14G2
IT14G, IT14G2
9T5746
CYLINDER AS
910E
910E
6E5999
CYLINDER AS
910E
910E
9T5779
CYLINDER AS
910E
910E
1012957
CYLINDER AS
910E
910E
6E5967
CYLINDER AS
910E
910E
3484918
CYLINDER GP-HYDRAULIC
CP-533E, CP-54B, CP-56, CP-68B, CP-74B, CP-76, CS-533E, CS-54, CS-54B, CS-56B, CS-64, CS-64B, CS-66B, CS-68B, CS-74, CS-74B, CS-76B, CS-78B
CP-533E, CP-54B, CP-56, CP-68B, CP-74B, CP-76, CS-533E, CS-54, CS-54B, CS-56B, CS-64, CS-64B, CS-66B, CS-68B, CS-74, CS-74B, CS-76B, CS-78B
416F, 420F, 422E, 422F, 428E, 428F, 430F, 432E, 432F, 434E, 434F, 442E, 444E, 444F
416E, 416F, 420E, 420F, 422E, 422F, 428E, 428F, 430E, 430F, 432E, 432F, 434E, 434F, 442E, 444E, 444F
1429926
CYLINDER & SEAL GP-BUCKET
325B L, 325C FM, 325D FM, 325D FM LL, 330B L, 330C FM, 330D FM, 568 FM LL, M325B
325B L, 325C FM, 325D FM, 325D FM LL, 330B L, 330C FM, 330D FM, 568 FM LL, M325B
1883120
CYLINDER GP-BUCKET
950K, 962K, 966G, 966K, 966M, 972G, 972K
950K, 962K, 966G, 966K, 966M, 972G, 972K
320C, 325C, 330C L
3427305
CYLINDER BLOCK GP
797, 797B, 797F
797, 797B, 797F
2P6486
CYLINDER HEAD GP
140B, 140G, 14G, 235, 3306, 528, 814, 815, 816, 966C, 966R, 977K, 977L, D5, D5B, D6C, D6D
140B, 140G, 14G, 235, 3306, 528, 814, 815, 816, 966C, 966R, 977K, 977L, D5, D5B, D6C, D6D
1U3991
CYLINDER GP-TILT
D5H XL, D6H, D6H II, D6H XL, D6H XR, D6R
D5H XL, D6H, D6H II, D6H XL, D6H XR, D6R