8J6359 CYLINDER GP-BLADE CENTERSHIFT Caterpillar parts
14G
Rating:
Alternative (cross code) number:
CA8J6359
8J-6359
8J6359
CA8J6359
8J-6359
8J6359
Weight: 199 pounds 90 kg.
Information:
BORE DIAMETER
95.25
mm
CLOSED LENGTH
2076.45
mm
PIN SIZE CAP END
38.51
mm
PIN SIZE ROD EYE
38.51
mm
ROD DIAMETER
57.15
mm
STROKE
1441.45
TYPE
THD CROWN
MOTOR GRADER,
Compatible equipment models: 8J6359:
Information:
Background Information On Incident Reporting
Any incident is an event involving any Caterpillar product which results in one of the following: personal injury, death, product damage, property damage, or an especially unique event though no injury or damage occurred. The purpose of the report is to gather and record objective factual information concerning the incident which will allow Caterpillar to evaluate the need for product changes. Information regarding the incident should be reported as soon as possible after the incident occurs. This will enable Caterpillar to quickly conduct further investigation and follow-up as required. Additional information can be sent in later. Accurate and factual information is essential, since incident reports may subsequently be reviewed in the course of future lawsuits.
Written Incident Reporting System
Caterpillar supplies a prepared form to make reporting of incidents easier, more uniform, and more accurate. Attached is an updated Incident Report Form that replaces the prior form. Additional forms may be duplicated from the one provided, or you may order pads of 50 through the regular Literature Order System. Request Form No. 01-082918-07. Complete instructions are on the back of the form to explain how to fill out and submit the report.
Contact Locations
If you have questions concerning the incident reporting procedure, please call the Technical Support Manager at (309) 675-6965 in Peoria, Illinois or the Manager of Standards & Regulations at 41-22-849-4215 in Geneva, Switzerland or the Product Safety Coordinator in Melbourne Australia at 03-9953-9524. Further, feel free to contact any of these individuals for any of the following reasons:
You have questions on how to proceed with the incident reporting or investigation process.
You have an opportunity to inspect the product involved in the incident or the incident site before either is altered.
You have in your possession, or can get possession of any parts involved in the incident.
Any incident is an event involving any Caterpillar product which results in one of the following: personal injury, death, product damage, property damage, or an especially unique event though no injury or damage occurred. The purpose of the report is to gather and record objective factual information concerning the incident which will allow Caterpillar to evaluate the need for product changes. Information regarding the incident should be reported as soon as possible after the incident occurs. This will enable Caterpillar to quickly conduct further investigation and follow-up as required. Additional information can be sent in later. Accurate and factual information is essential, since incident reports may subsequently be reviewed in the course of future lawsuits.
Written Incident Reporting System
Caterpillar supplies a prepared form to make reporting of incidents easier, more uniform, and more accurate. Attached is an updated Incident Report Form that replaces the prior form. Additional forms may be duplicated from the one provided, or you may order pads of 50 through the regular Literature Order System. Request Form No. 01-082918-07. Complete instructions are on the back of the form to explain how to fill out and submit the report.
Contact Locations
If you have questions concerning the incident reporting procedure, please call the Technical Support Manager at (309) 675-6965 in Peoria, Illinois or the Manager of Standards & Regulations at 41-22-849-4215 in Geneva, Switzerland or the Product Safety Coordinator in Melbourne Australia at 03-9953-9524. Further, feel free to contact any of these individuals for any of the following reasons:
You have questions on how to proceed with the incident reporting or investigation process.
You have an opportunity to inspect the product involved in the incident or the incident site before either is altered.
You have in your possession, or can get possession of any parts involved in the incident.
Caterpillar SIS machinery equipment:
Caterpillar parts catalog:
Parts cylinder Caterpillar catalog:
7N8876
CYLINDER HEAD GP
12G, 12H, 12H ES, 12H NA, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H NA, 160G, 160H, 160H ES, 160H NA, 163H NA, 235, 235B, 3306, 3306B, 528, 528B, 530B, 814B, 815B, 816B, 966C, 966D, 966R, 972G, D25...
12G, 12H, 12H ES, 12H NA, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H NA, 160G, 160H, 160H ES, 160H NA, 163H NA, 235, 235B, 3306, 3306B, 528, 528B, 530B, 814B, 815B, 816B, 966C, 966D, 966R, 972G, D25...
8N1187
CYLINDER HEAD GP
120B, 12G, 140G, 14G, 1673C, 235, 3306, 528, 561D, 571G, 572G, 627B, 637D, 639D, 814, 815, 816, 966C, 977L, D5B, D6D, D7F, D7G
120B, 12G, 140G, 14G, 1673C, 235, 3306, 528, 561D, 571G, 572G, 627B, 637D, 639D, 814, 815, 816, 966C, 977L, D5B, D6D, D7F, D7G
1N3576
CYLINDER BLOCK GP
120B, 12G, 12H, 12H ES, 12H NA, 140B, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H NA, 160G, 160H, 160H ES, 160H NA, 163H NA, 1673C, 235, 235B, 235C, 235D, 330, 330 FM L, 330 L, 3306, 3306B, 3306C, 33...
120B, 12G, 12H, 12H ES, 12H NA, 140B, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H NA, 160G, 160H, 160H ES, 160H NA, 163H NA, 1673C, 235, 235B, 235C, 235D, 330, 330 FM L, 330 L, 3306, 3306B, 3306C, 33...
9T3206
CYLINDER GP-SIDESHIFT
14G, 14H, 14H NA, 16G, 16H, 16H NA
14G, 14H, 14H NA, 16G, 16H, 16H NA
8N6796
CYLINDER HEAD GP
12G, 12H, 12H ES, 12H NA, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H NA, 160H, 160H ES, 160H NA, 163H NA, 235, 235B, 235D, 330, 330 FM L, 330 L, 3306, 3306B, 330B, 330B L, 350, 528, 528B, 530B, 545,...
12G, 12H, 12H ES, 12H NA, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H NA, 160H, 160H ES, 160H NA, 163H NA, 235, 235B, 235D, 330, 330 FM L, 330 L, 3306, 3306B, 330B, 330B L, 350, 528, 528B, 530B, 545,...
7C4006
CYLINDER HEAD AS
12G, 12H, 12H ES, 12H NA, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H NA, 160G, 160H, 160H ES, 160H NA, 163H NA, 235B, 3306, 3306B, 330B L, 350, 528B, 530B, 815B, 966F, 966F II, 966G, 970F, 972G, 973...
12G, 12H, 12H ES, 12H NA, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H NA, 160G, 160H, 160H ES, 160H NA, 163H NA, 235B, 3306, 3306B, 330B L, 350, 528B, 530B, 815B, 966F, 966F II, 966G, 970F, 972G, 973...
7N7445
CYLINDER BLOCK
14G, 14H NA, 16G, 16H NA, 3176, 3176B, 3176C, 3196, 3304, 3306, 3306B, 3306C, 3406B, 3406C, 3406E, 3508, 3508B, 3512, 3512B, 3516, 3516B, 611, 615C, 621, 621E, 621F, 621R, 623E, 623F, 627E, 627F, 814B...
14G, 14H NA, 16G, 16H NA, 3176, 3176B, 3176C, 3196, 3304, 3306, 3306B, 3306C, 3406B, 3406C, 3406E, 3508, 3508B, 3512, 3512B, 3516, 3516B, 611, 615C, 621, 621E, 621F, 621R, 623E, 623F, 627E, 627F, 814B...
0R4488
CYLINDER PACK GP
12G, 12H, 140G, 140H, 140H NA, 143H, 14G, 160H, D6D, D6H, D6H XL, D6H XR, D6R
12G, 12H, 140G, 140H, 140H NA, 143H, 14G, 160H, D6D, D6H, D6H XL, D6H XR, D6R
8W0328
CYLINDER-DAMPER
120G, 12G, 130G, 140G, 14G, 160G, 16G, 508
120G, 12G, 130G, 140G, 14G, 160G, 16G, 508
1050017
CYLINDER
120G, 12G, 130G, 140G, 14G, 160G, 16G
120G, 12G, 130G, 140G, 14G, 160G, 16G
3056716
CYLINDER GP-THUMB
307D, 308D, 308E2 CR
307D, 308D, 308E2 CR
0819292
CYLINDER GP-HYDRAULIC
AP-1000, AP-1050
AP-1000, AP-1050
2043614
CYLINDER & SEAL GP-BOOM
320C, 320C FM, 320C L, 321C
320C, 320C FM, 320C L, 321C
1163578
CYLINDER GP-BOOM
325B L, 330B, 330B L, W330B
325B L, 330B, 330B L, W330B
9D8920
CYLINDER & MOUNTING GP-STEERIN
768C, 769C, 769D, 771C, 771D
768C, 769C, 769D, 771C, 771D
1772442
CYLINDER & SEAL GP-STICK
322B LN, 322C, 322C FM
322B LN, 322C, 322C FM
3750718
CYLINDER GP-STICK
450E, 450F
450E, 450F
6E0099
CYLINDER GP-STABILIZER-RH
416, 416B, 426, 426B, 436, 436B
416, 416B, 426, 426B, 436, 436B
4P7264
CYLINDER BLOCK GP
3516, 789, 789B, 793, 793B, 994, G3516
3516, 789, 789B, 793, 793B, 994, G3516