CYLINDER GP-LIFT 9J5559 - Caterpillar

(1) The center tooth of gear sector (1) must be in the center of gear nut (2).(2) Tooth clearance between gear sector (1) and nut gear (2) is ... .00 in.(0,0 mm) Turn the housing for sector gear shaft to get .00 in. (0,0 mm) tooth clearance between gears (1) and (2).(3) 9M5552 Shim Thickness ... .010 in.(0,25 mm)(4) When the steering wheel is turned from right to left or from left to right (with the engine stopped) the distance the pin hole in lever (4) moves is ... 1.12 to 1.15 in.(28,4 to 29,2 mm) Add shims (3) to increase, or remove shims to decrease the distance lever (4) can move.(5) Loosen the locknut and turn screw (5) against the lever shaft which is connected to the follow-up linkage, then loosen screw (5) 1/8 turn and tighten the locknut.