CYLINDER 9S6338 - Caterpillar

Illustration 15 g06224016
Use 514-8162 Bracket As as a template for drill location.
Cut 7 mm x 400 mm clearance in 468-2114 Support As for 514-8162 Bracket As.
Illustration 16 g06224017
Weld two 8T-3490 Weld Nut above two drilled holes in 468-2114 Support As.
523-6343 Control Harness As Assembly Procedure
Illustration 17 g06224018
Connect NX-C5 to NY-C2 in 523-6343 Control Harness As.
Illustration 18 g06224019
Illustration 19 g06224020
Illustration 20 g06224024
Illustration 21 g06224025
Illustration 22 g06224028
Connect NY-C1 to 464-4918 Soot Sensor Gp.
Illustration 23 g06224030
Seal cables in grommets with methoxy cure, black non-corrosive RTV silicone sealant. (Seal not shown)
464-4918 Soot Sensor Gp Rework Procedure
Illustration 24 g06224031
Illustration 25 g06224033
Illustration 26 g06224036
Illustration 27 g06224039
Replace the insulation panel prior to installation of new cover if the machine is equipped with sound suppression.
Illustration 28 g06224040
Illustration 29 g06224041