CYLINDER GP-BLADE TIP 9T2461 - Caterpillar

Fuel Quantity Test
The quantity of fuel should be tested if the heater has difficulty of starting. The quantity of fuel should also be tested if the heater has difficulty in maintaining a flame.Note: Measure the quantity of fuel when the battery is sufficiently charged.Preparation
Remove the fuel line from the heater and insert the line into a graduated measuring cup.
Activate the heater. When the fuel delivery is uniform, the fuel line is full and the fuel line is bled.
Deactivate the heater.
Empty the measuring cup.Measurement
Activate the heater.Note: The fuel delivery starts automatically after 63 seconds after activating the heater.Note: After 105 seconds of fuel delivery, the heater will shut off automatically.
Wait for the heater in order to perform the restart.Note: The fuel pump is automatically shut down after another 75 seconds.
Deactivate the heater.
Measure the fuel in the measuring cup.Evaluation
If the quantity is less than the tolerance, replace the fuel metering pump. The value should be 19 mL 1.9 mL.