9T7063 CYLINDER GP-STICK Caterpillar parts
416, 428
Rating:
Alternative (cross code) number:
CA9T7063
9T-7063
9T7063
CA9T7063
9T-7063
9T7063
Weight: 115 pounds 52 kg.
Information:
BORE DIAMETER
101.6
mm
CLOSED LENGTH
1195.4
mm
PIN SIZE CAP END
45
mm
PIN SIZE ROD EYE
45
mm
ROD DIAMETER
53.975
mm
STROKE
839
TYPE
THD GLAND
BACKHOE LOADER,
Number on catalog scheme:
For full view, you need register
Information:
Removal Procedure
Start By:
Remove the engine oil pan. Refer to Disassembly and Assembly, "Engine Oil Pan - Remove and Install".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g00987444
Remove bolt (2) and piston cooling jet (1) from each cylinder. Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g00987444
Position piston cooling jet (1) in the cylinder block. Install bolt (2). Tighten the bolt to a torque of 28 7 N m (21 5 lb ft). End By:
Install the engine oil pan. Refer to Disassembly and Assembly, "Engine Oil Pan - Remove and Install".
Start By:
Remove the engine oil pan. Refer to Disassembly and Assembly, "Engine Oil Pan - Remove and Install".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g00987444
Remove bolt (2) and piston cooling jet (1) from each cylinder. Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g00987444
Position piston cooling jet (1) in the cylinder block. Install bolt (2). Tighten the bolt to a torque of 28 7 N m (21 5 lb ft). End By:
Install the engine oil pan. Refer to Disassembly and Assembly, "Engine Oil Pan - Remove and Install".
Caterpillar SIS machinery equipment:
Parts cylinder Caterpillar catalog:
416, 416B, 416C, 426, 426B, 426C, 428, 428B, 428C, 432D, 432E, 434E, 436, 436B, 436C, 438, 438B, 438C, 442D, 442E, 444E, 902, 906, TH220B, TH330B, TH340B, TH350B, TH355B, TH460B, TH560B, TH62, TH63, T...
206, 212, 416, 426, 428, 436, 438, AP-800, CB-424, CP-433B, CS-323, CS-431B, PR-75, PS-110, PS-130, PS-180, RT50, WE-601B
416, 416B, 416C, 426, 426B, 428, 428B, 428C, 436, 436B, 438, 438B, 438C
428, 438
4T5601
CYLINDER GP-BUCKET
416, 426, 428
416, 426, 428
206, 416, 428, 436, CB-424, CS-323, PR-75
9T7894
CYLINDER GP
416, 426, 428
416, 426, 428
416, 428, 438
4P4723
CYLINDER HEAD GP
416, 428, 436
416, 428, 436
416B, 416C, 416D, 424D, 426, 426B, 428, 428B, 428C, 438C
414E, 416B, 416C, 416D, 416E, 420D, 422E, 424D, 426, 426C, 428, 428B, 428C, 428D, 428E, 430D, 432D, 432E, 434E, 436C, 438C, 438D, 442D, 442E, 444E, 902, 904B, 904H, 906, 906H, 906H2, 907H, 907H2, 908H...
424D, 428, 428B, 428C, 428D, 432D, 438, 438B, 438C, 438D, 442D
1011206
CYLINDER HEAD GP
3508, 3512, 3516
3508, 3512, 3516
2W8241
CYLINDER BLOCK GP
3508, 777B, D11N
3508, 777B, D11N
1051531
CYLINDER HEAD GP
3406B
3406B
1915553
CYLINDER & SEAL GP-BUCKET
330C, 330C L
330C, 330C L
1535737
CYLINDER GP-BOOM
426C, 436C
426C, 436C
1535735
CYLINDER GP-EXTENDABLE STICK
426C, 430D, 436C
426C, 430D, 436C
1771765
CYLINDER & SEAL GP-BOOM
325B L, 325C FM, 325D FM, 325D FM LL, M325B
325B L, 325C FM, 325D FM, 325D FM LL, M325B
3604600
CYLINDER & LINES GP-BOOM
328D LCR
328D LCR