7G2176 DAMPER-BOLT Caterpillar parts
5110B, 589, 69D, 769C, 769D, 771C, 771D, 772B, 773B, 773D, 773E, 773F, 773G, 773G LRC, 773G OEM, 775B, 775D, 775E, 775F, 775G, 775G LRC, 775G OEM, 966D, 980C, 992C, 992D, AD55B, AD60, D10N, D10R, D10T...
Rating:
Alternative (cross code) number:
CA7G2176
7G-2176
7G2176
CA7G2176
7G-2176
7G2176
Weight: 0.05 pounds 0 kg.
ARTICULATED TRUCK, WHEEL LOADER,
Compatible equipment models: 7G2176:
Number on catalog scheme:
8
For full view, you need register
Information:
Note: The troubleshooting information is intended to aid in diagnosing a given problem. The possible causes are ordered from the most probable cause to the least probable cause. The possible causes should be examined in order until the problem is resolved.Prior to carrying out troubleshooting on the torque converter, use Caterpillar ET in order to diagnose any fault codes that may be present. Refer to Troubleshooting, Systems Operation, Testing and Adjusting, KENR5099, "Power Train Electronic Control System".If fault codes are present, repair the cause of the fault code.The Torque Converter or the Transmission is Overheating
Possible Cause
The transmission may have been operated incorrectly.
Operate the transmission in the correct manner. Refer to the Operation and Maintenance Manual, SEBU8527.
The temperature sensors in the transmission hydraulic control system may not be functioning correctly.
Use ET in order to determine whether there are any faults with the temperature sensors.
The power train oil level is lower than the specification.
Check the transmission oil level. Refer to Specifications, Systems Operation/Testing and Adjusting, "Visual Inspection".
The coolant flow through the transmission oil cooler is below the specification.
The oil flow through the transmission oil cooler is below the specification.
Check the oil pressure to the transmission oil cooler. Refer to Specifications, Systems Operation/Testing and Adjusting, "Relief Valve (Torque Converter Outlet) Pressure - Test and Adjust".
The torque converter inlet pressure is outside specifications.
Check the torque converter inlet pressure and the torque converter inlet relief valve. Refer to Specifications, Systems Operation/Testing and Adjusting, "Relief Valve (Torque Converter Inlet) Pressure - Test".
The torque converter outlet pressure is outside specifications.
Check the torque converter outlet pressure. Refer to Specifications, Systems Operation/Testing and Adjusting, "Relief Valve (Torque Converter Outlet) Pressure - Test and Adjust".
The torque converter is worn or damaged.
Inspect the components of the torque converter for wear or damage. Refer to Disassembly and Assembly, KENR5098, "Torque Converter - Disassemble and Assemble" for the CX28.
The torque converter lockup clutch is not functioning.
Test the correct function of the torque converter
Possible Cause
The transmission may have been operated incorrectly.
Operate the transmission in the correct manner. Refer to the Operation and Maintenance Manual, SEBU8527.
The temperature sensors in the transmission hydraulic control system may not be functioning correctly.
Use ET in order to determine whether there are any faults with the temperature sensors.
The power train oil level is lower than the specification.
Check the transmission oil level. Refer to Specifications, Systems Operation/Testing and Adjusting, "Visual Inspection".
The coolant flow through the transmission oil cooler is below the specification.
The oil flow through the transmission oil cooler is below the specification.
Check the oil pressure to the transmission oil cooler. Refer to Specifications, Systems Operation/Testing and Adjusting, "Relief Valve (Torque Converter Outlet) Pressure - Test and Adjust".
The torque converter inlet pressure is outside specifications.
Check the torque converter inlet pressure and the torque converter inlet relief valve. Refer to Specifications, Systems Operation/Testing and Adjusting, "Relief Valve (Torque Converter Inlet) Pressure - Test".
The torque converter outlet pressure is outside specifications.
Check the torque converter outlet pressure. Refer to Specifications, Systems Operation/Testing and Adjusting, "Relief Valve (Torque Converter Outlet) Pressure - Test and Adjust".
The torque converter is worn or damaged.
Inspect the components of the torque converter for wear or damage. Refer to Disassembly and Assembly, KENR5098, "Torque Converter - Disassemble and Assemble" for the CX28.
The torque converter lockup clutch is not functioning.
Test the correct function of the torque converter
Cat SIS web machinery list:
Parts damper Caterpillar catalog:
3408, 3408B, 589, 631E, 633D, 637D, 657E, 834B, 988B, D8L, D9N, PR-450
3408, 3408B, 589, 631E, 633D, 637D, 657E, 834B, 988B, D8L, D9N, PR-450
245, 3406, 3408, 3408B, 589, 621, 631E, 633D, 637D, 657E, 834B, 980C, 988B, D8L, D9N, PR-450
245, 3304, 3306, 3406, 621, 980C
16G, 245, 3406, 3406B, 3408, 578, 621, 621B, 621E, 623E, 627E, 631E, 637D, 637E, 657E, 826C, 980C, 988B, 988F, G3406, SS-250
3406B, 980C, 980F
3406B, 3408, 69D, 769C, AD40, AD45, AE40, AE40 II, D8L, D9N, D9R, PR-450, PR-450C
824G II, 824H, 826H, 834G, 834H, 836H, 844, 854G, 966G II, 972G II, 980G II, 988H, 990 II, 992G, C-9, C27, C32, C9, C9.3, CX31-C9I, D10T, D11N, D11R, D8R, D8R II, D9R, R1600, R1600G, R1600H, R1700 II,...
784B, 784C, 785, 785B, 785C, 785D, 789, 789B, 789C, 789D, 793, 793B, 793C, 793D, 793F, 793F CMD, 793F OEM, 793F-XQ, 797, 797B, 797F, 844, 844H, 844K, 854G, 854K, 990, 990 II, 990H, 990K, 992C, 992D, 9...
235, 572G, D6H
772, 772B, 773, 773B, 773D, 773E, 773F, 773G, 773G LRC, 773G OEM, 775B, 775D, 775E, 775F, 775G, 775G LRC, 775G OEM, 776, 776C, 776D, 777, 777B, 777D, 777F, 784B, 784C, 785, 785B, 785C, 785D, 789, 789B...
776C, 776D, 777D, 777F, AD55, AD55B, AD60
3389808
DAMPER AS
589, 657E, 769C, 769D, 771C, 771D, 834B, 836, 988B, 988F, 988F II, D8L, D9N, D9R, PM-565, PM-565B
589, 657E, 769C, 769D, 771C, 771D, 834B, 836, 988B, 988F, 988F II, D8L, D9N, D9R, PM-565, PM-565B
320D, 320D FM, 320D L, 320D LN, 320D2, 320D2 L, 320E, 320E L, 320E LN, 322B, 322B L, 322B LN, 322C, 322C FM, 323D L, 323D LN, 323D SA, 323D2 L, 323E L, 324D, 324D FM, 324D FM LL, 324D L, 324D LN, 325B...
307B
1474762
DAMPER
307B
307B
1474760
DAMPER
307B
307B
5I3589
DAMPER ASSEM.
311B, 320 L, 320B, 325, 325 LN, 325B, 350, 375
311B, 320 L, 320B, 325, 325 LN, 325B, 350, 375
2894224
DAMPER
583T, 587R, 587T
583T, 587R, 587T
2180065
DAMPER AS
973C
973C
1W4324
DAMPER AS
973, 973C
973, 973C
1W4961
DAMPER AS
973, 973C
973, 973C
D5, D5E