DASH-AS 1869518 - Caterpillar

Illustration 1 g03869339
Top view
Illustration 2 g03869326
Table 1
Item Qty Part Specification Description
1 40 461-3883 Bolt Before assembly, remove compound, oil and dust from female threads, then apply Loctite C5A Copper Anti-Seize compound to the bolt threads.
Use the following tightening procedure:
1. Tighten bolts to 250 25 N m (184 18 lb ft).
2. Turn to an additional angle of 45 5 degrees.
2 23 461-3882 Bolt Before assembly, remove compound, oil and dust from female threads, then apply Loctite C5A Copper Anti-Seize compound to the bolt threads.
Use the following tightening procedure:
1. Tighten bolts to 250 25 N m (184 18 lb ft).
2. Turn to an additional angle of 45 5 degrees.
3 - - Before assembly, the surfaces must be clean and free of protective coating.
4 - - Before assembly into the upper frame group, coat the mating surfaces with 1U-8846 Gasket Sealant.
5 1 096-4755 Pin Before assembly, apply Loctite C5A copper anti-seize to the pin
6 1 5D-1026 Band Clamp Torque to 4.5 0.5 N m (39.8 4.4 lb in).