9P2067 DASH ASSEM. Caterpillar parts
D10
Rating:
Alternative (cross code) number:
CA9P2067
9P-2067
9P2067
CA9P2067
9P-2067
9P2067
Weight: 22 pounds 10 kg.
TRACK-TYPE TRACTOR,
Compatible equipment models: 9P2067:
Number on catalog scheme:
10
For full view, you need register
Information:
Installation Procedure
Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts. Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement.
Illustration 1 g01385897
Illustration 2 g01385902
Connect all harness assemblies and lamps. Position instrument panel (4). Install bolts (6) and (7). Install screw (5). Repeat for opposite side.
Illustration 3 g01385901
Illustration 4 g01385892
Install cable assembly (3), nut (2), and knob (1) from instrument panel (4) .
Turn the power disconnect switch to the on position.
Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts. Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement.
Illustration 1 g01385897
Illustration 2 g01385902
Connect all harness assemblies and lamps. Position instrument panel (4). Install bolts (6) and (7). Install screw (5). Repeat for opposite side.
Illustration 3 g01385901
Illustration 4 g01385892
Install cable assembly (3), nut (2), and knob (1) from instrument panel (4) .
Turn the power disconnect switch to the on position.
Caterpillar parts catalog:
Parts dash Caterpillar catalog:
9G1629
DASH ASSEM.
D10, D9L
D10, D9L
9W7503
DASH AS
D11N, D9N
D11N, D9N
9W2643
DASH AS
D8L
D8L
7T0867
DASH AS
D11N, D8L, D9L
D11N, D8L, D9L
3T2294
DASH AS
D8L
D8L
6T4668
DASH AS
D8L
D8L