1152510 DEFLECTOR Caterpillar parts
Rating:
Alternative (cross code) number:
CA1152510
115-2510
1152510
CA1152510
115-2510
1152510
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$59.83
01 Jun 2023
US: GR Parts
GR Parts Wheel fits - 20199 20200 20975 20977 8 Inch Timemaster 120-7045 125-2510
GR Parts More than 10,000 positions: You will find a wide selection of garden equipment parts in our store - from spark plugs to belts, cutting blades, batteries, crankshafts, bearings, carburetors, starters, filters, and repair kits. In our product range, we have more than 10.000 garden equipment parts. || Compatible with: 20199 20200 20975 20977 8 Inch Timemaster 120-7045 125-2510 || All our replacement parts and rebuild kits are engineered and manufactured in most cases in line with the highest standards and under rigorous quality controls. As a result, you always get perfectly fitting, durable, wear-resistant, high-performing replacement parts and never get mismatched or underperforming equipment. || GR Parts: Replacement parts for most types of lawnmowers, trimmers, snowblowers, tractors, chainsaws, pressure washers, edgers, tillers and generators. || All parts are manufactured with the highest standards and under rigorous quality controls. As a result, you always get perfectly fitting, durable, wear-resistant, high-performing replacement parts, and never get mismatched or underperforming equipment.
GR Parts More than 10,000 positions: You will find a wide selection of garden equipment parts in our store - from spark plugs to belts, cutting blades, batteries, crankshafts, bearings, carburetors, starters, filters, and repair kits. In our product range, we have more than 10.000 garden equipment parts. || Compatible with: 20199 20200 20975 20977 8 Inch Timemaster 120-7045 125-2510 || All our replacement parts and rebuild kits are engineered and manufactured in most cases in line with the highest standards and under rigorous quality controls. As a result, you always get perfectly fitting, durable, wear-resistant, high-performing replacement parts and never get mismatched or underperforming equipment. || GR Parts: Replacement parts for most types of lawnmowers, trimmers, snowblowers, tractors, chainsaws, pressure washers, edgers, tillers and generators. || All parts are manufactured with the highest standards and under rigorous quality controls. As a result, you always get perfectly fitting, durable, wear-resistant, high-performing replacement parts, and never get mismatched or underperforming equipment.
For full view, you need register
Information:
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7575 Link Bracket 2
B 155-0695 Thread Lock Compound 1 Cleanliness is an important factor. Before you begin the installation procedure, the exterior of the components should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.
Illustration 1 g01528116
Illustration 2 g01528193
Attach Tooling (A) and a suitable lifting device to hydraulic tank (10). The weight of hydraulic tank (10) is approximately 82 kg (180 lb).
Position hydraulic tank (10). Apply Tooling (B) to bolts (12). Install bolts (12) and tighten to a torque of 270 40 N m (199 30 lb ft).
Connect hose (11) .
Position the valve assembly and install bolts (9). Connect hose assembly (8) .
Illustration 3 g01528079
Install bolts (1) .
Connect harness assembly (7) onto the sensor.
Connect hose assemblies (5) and hose assembly (6). Secure the hose assemblies with cable straps (4) .
Illustration 4 g01528064
Connect hose assembly (3) .
Position the oil filter and base assembly and install bolts (2). Tighten bolts (4) to a torque of 15 3 N m (11 2 lb ft).
Install remaining bolts (1) .
Fill the hydraulic tank. Refer to Operation and Maintenance Manual, "Hydraulic System Oil Level - Check".End By: Install the fuel tank. Refer to Disassembly and Assembly, "Fuel Tank - Install".
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7575 Link Bracket 2
B 155-0695 Thread Lock Compound 1 Cleanliness is an important factor. Before you begin the installation procedure, the exterior of the components should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.
Illustration 1 g01528116
Illustration 2 g01528193
Attach Tooling (A) and a suitable lifting device to hydraulic tank (10). The weight of hydraulic tank (10) is approximately 82 kg (180 lb).
Position hydraulic tank (10). Apply Tooling (B) to bolts (12). Install bolts (12) and tighten to a torque of 270 40 N m (199 30 lb ft).
Connect hose (11) .
Position the valve assembly and install bolts (9). Connect hose assembly (8) .
Illustration 3 g01528079
Install bolts (1) .
Connect harness assembly (7) onto the sensor.
Connect hose assemblies (5) and hose assembly (6). Secure the hose assemblies with cable straps (4) .
Illustration 4 g01528064
Connect hose assembly (3) .
Position the oil filter and base assembly and install bolts (2). Tighten bolts (4) to a torque of 15 3 N m (11 2 lb ft).
Install remaining bolts (1) .
Fill the hydraulic tank. Refer to Operation and Maintenance Manual, "Hydraulic System Oil Level - Check".End By: Install the fuel tank. Refer to Disassembly and Assembly, "Fuel Tank - Install".
Parts deflector Caterpillar catalog:
1147371
DEFLECTOR,OI
Caterpillar
Caterpillar
1147050
DEFLECTOR,OI
Caterpillar
Caterpillar
1112872
DEFLECTOR
Caterpillar
Caterpillar
1078388
DEFLECTOR AS
Caterpillar
Caterpillar
1040292
DEFLECTOR,OI
Caterpillar
Caterpillar
1040002
DEFLECTOR,OI
Caterpillar
Caterpillar
1345475
DEFLECTOR-MUD
Caterpillar
Caterpillar
1330828
DEFLECTOR
Caterpillar
Caterpillar
1329971
DEFLECTOR AS.
Caterpillar
Caterpillar
1304838
DEFLECTOR
Caterpillar
Caterpillar
1295690
DEFLECTOR
Caterpillar
Caterpillar
1163712
DEFLECTOR AS
Caterpillar
Caterpillar