DEFLECTOR-MUD 1497356 - Caterpillar

Illustration 1 g00666109
(1) Drain valve (2) Ring nut (3) Filter case (4) Screen holder (5) Inlet screen (6) O-ring
Loosen drain valve (1) of the water separator and drain the water into a suitable container.Note: Refer to Operation and Maintenance Manual, "General Hazard Information" for information on containing fluid spillage.Note: Dispose of drained fluids according to local regulations.
Loosen ring nut (2). Remove filter case (3) and screen holder (4) .
Remove inlet screen (5) from the water separator base.
Clean inlet screen (5) by using a clean, nonflammable solvent.
Check O-ring (6). If the O-ring is damaged, replace the O-ring.
Replace the inlet screen into the water separator base.
Replace filter case (3) and screen holder (4). Tighten ring nut (2) .
Close the access door.