DEFLECTOR AS 1513944 - Caterpillar

Illustration 1 g00593836
(A) Stick cylinder (B) Stick (C) Boom cylinderNote: All bores must be free of paint. Coat all bores for pins with lubricant. (1) Lubricate the sealing lip slightly with the lubricant that is being sealed. (2) 208-1922 Pin Diameter after plating ... 139.85 0.04 mm (5.5059 0.0016 inch) Minimum thickness for plating ... 0.005 mm (0.0002 inch) Diameter of Bore for pin ... 140.05 0.05 mm (5.514 0.002 inch) (3) 149-9440 Pin Assembly Diameter after plating ... 139.850 0.040 mm (5.5059 0.0016 inch) Minimum thickness for plating ... 0.005 mm (0.0002 inch) Diameter of Bore for pin ... 140.050 0.050 mm (5.5138 0.0020 inch) (4) Use the necessary shims to adjust the lateral clearance. Maximum clearance ... 0.800 mm (0.0315 inch) 093-0077 Shim thickness ... 1.0 mm (0.04 inch) 093-0109 Shim thickness ... 2.0 mm (0.08 inch) 158-3852 Shim thickness ... 0.5 mm (0.02 inch) (5) 158-4105 Pin Assembly Diameter after plating ... 129.850 0.040 mm (5.1122 0.0016 inch) Minimum thickness for plating ... 0.040 to 0.050 mm (0.0016 to 0.0020 inch) Diameter of Bore for pin ... 130.050 0.050 mm (5.1201 0.0020 inch) (6) Use the necessary shims to adjust the lateral clearance. Maximum clearance ... 1.0 mm (0.04 inch) 093-0076 Shim thickness ... 1.0 mm (0.04 inch) 093-0108 Shim thickness ... 2.0 mm (0.08 inch) 158-3853 Shim thickness ... 0.5 mm (0.02 inch)