3639118 DEFLECTOR-MUD Caterpillar parts
789C
Rating:
Alternative (cross code) number:
CA3639118
363-9118
3639118
CA3639118
363-9118
3639118
Weight: 10 pounds 4 kg.
TRUCK,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
Haiyazhma Belt Tensioner 3691279 3635034 3639118 Compatible with Cummins Engine K38 KTA38
Haiyazhma Part Name: Belt Tensioner || Part Number: 3691279 3635034 3639118 Note: Please check the fitment carefully before purchase. Or just tell us the part number you need. || Engine Model: KTA38 || Applicable: Compatible with Cummins Engine K38 KTA38 || Package included: 1pcs Belt Tensioner 3691279 3635034 3639118
Haiyazhma Part Name: Belt Tensioner || Part Number: 3691279 3635034 3639118 Note: Please check the fitment carefully before purchase. Or just tell us the part number you need. || Engine Model: KTA38 || Applicable: Compatible with Cummins Engine K38 KTA38 || Package included: 1pcs Belt Tensioner 3691279 3635034 3639118
Belt Tensioner 3635034 3691279 3639118 For Cummins Engine K38 KTA38
YYBMBFBYQ Package included: x 1 Belt Tensioner || Easy installation and replacement. || Feature:Stable characteristics, high reliability. || Note: If you are not sure whether it is suitable for your engine, please provide your engine nameplate or part number, So that we can satisfactorily address your concerns. || Warm reminder: We will provide comprehensive after-sales service and technical support to ensure that any issues encountered during use can be resolved promptly. Thank you.
YYBMBFBYQ Package included: x 1 Belt Tensioner || Easy installation and replacement. || Feature:Stable characteristics, high reliability. || Note: If you are not sure whether it is suitable for your engine, please provide your engine nameplate or part number, So that we can satisfactorily address your concerns. || Warm reminder: We will provide comprehensive after-sales service and technical support to ensure that any issues encountered during use can be resolved promptly. Thank you.
Belt Tensioner 3635034 3691279 3639118 For Cummins Engine K38 KTA38
YYBMBFBYQ Package included: x 1 Belt Tensioner || Easy installation and replacement. || Feature:Stable characteristics, high reliability. || Note: If you are not sure whether it is suitable for your engine, please provide your engine nameplate or part number, So that we can satisfactorily address your concerns. || Warm reminder: We will provide comprehensive after-sales service and technical support to ensure that any issues encountered during use can be resolved promptly. Thank you.
YYBMBFBYQ Package included: x 1 Belt Tensioner || Easy installation and replacement. || Feature:Stable characteristics, high reliability. || Note: If you are not sure whether it is suitable for your engine, please provide your engine nameplate or part number, So that we can satisfactorily address your concerns. || Warm reminder: We will provide comprehensive after-sales service and technical support to ensure that any issues encountered during use can be resolved promptly. Thank you.
For full view, you need register
Compatible equipment models: 3639118:
Information:
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
C 4C-9485 Pin Driver Cap 1
D 5P-0960 Grease Cartridge 1
Illustration 1 g01203298
Apply Tooling (D) to the outside machined surface of flange (8) and the bore for flange (8). Install flange (8) to bucket (1). Note: Ensure that the alignment pin in flange (8) is positioned between two of the bolt holes.
Illustration 2 g01203184
Position O-ring seals (5) onto the flanges of bucket (1).
Use the machine hydraulics in order to position the stick into bucket (1).
Illustration 3 g01203207
Install Tooling (C) to pin assembly (7). Apply Tooling (D) to pin assembly (7).
Attach a suitable lifting device to pin assembly (7) and install pin assembly (7). The weight of pin assembly (7) is approximately 34 kg (75 lb).
Remove Tooling (C) from pin assembly (7).
Illustration 4 g01203252
Install bolt (6).
Illustration 5 g01203254
Illustration 6 g01203317
Align the locating hole in plate (10) with the locating pin in flange (8). Position shims (9) and plate (10). Install bolts (11) and tighten bolts (11) evenly.
Move the bucket to the side until the bucket contacts the stick. Measure the clearance between the bucket and the stick at flange (8). Record this dimension as Dimension (X). Remove bolts (11) and plate (10). Add or remove shims (9) until Dimension (X) is between 0.5 mm (0.02 inch) and 1.0 mm (0.04 inch). Install flange (8) and bolts (11). Tighten bolts (11) evenly.
Illustration 7 g01202427
Position O-ring seals (5) from the flanges of bucket (1) into the pin joint.
Illustration 8 g01203354
Install Tooling (C) to pin assembly (4). Apply Tooling (D) to pin assembly (4). Attach a suitable lifting device to pin assembly (4). Position the bucket linkage and install pin assembly (4). The weight of pin assembly (4) is approximately 34 kg (75 lb). Remove Tooling (C) from pin assembly (4).
Illustration 9 g01203363
Install bolt (3) to pin assembly (4).
Illustration 10 g01202290
Position O-ring seals (2) from the flanges of bucket (1) into the pin joint.
Table 1
Required Tools
Tool Part Number Part Description Qty
C 4C-9485 Pin Driver Cap 1
D 5P-0960 Grease Cartridge 1
Illustration 1 g01203298
Apply Tooling (D) to the outside machined surface of flange (8) and the bore for flange (8). Install flange (8) to bucket (1). Note: Ensure that the alignment pin in flange (8) is positioned between two of the bolt holes.
Illustration 2 g01203184
Position O-ring seals (5) onto the flanges of bucket (1).
Use the machine hydraulics in order to position the stick into bucket (1).
Illustration 3 g01203207
Install Tooling (C) to pin assembly (7). Apply Tooling (D) to pin assembly (7).
Attach a suitable lifting device to pin assembly (7) and install pin assembly (7). The weight of pin assembly (7) is approximately 34 kg (75 lb).
Remove Tooling (C) from pin assembly (7).
Illustration 4 g01203252
Install bolt (6).
Illustration 5 g01203254
Illustration 6 g01203317
Align the locating hole in plate (10) with the locating pin in flange (8). Position shims (9) and plate (10). Install bolts (11) and tighten bolts (11) evenly.
Move the bucket to the side until the bucket contacts the stick. Measure the clearance between the bucket and the stick at flange (8). Record this dimension as Dimension (X). Remove bolts (11) and plate (10). Add or remove shims (9) until Dimension (X) is between 0.5 mm (0.02 inch) and 1.0 mm (0.04 inch). Install flange (8) and bolts (11). Tighten bolts (11) evenly.
Illustration 7 g01202427
Position O-ring seals (5) from the flanges of bucket (1) into the pin joint.
Illustration 8 g01203354
Install Tooling (C) to pin assembly (4). Apply Tooling (D) to pin assembly (4). Attach a suitable lifting device to pin assembly (4). Position the bucket linkage and install pin assembly (4). The weight of pin assembly (4) is approximately 34 kg (75 lb). Remove Tooling (C) from pin assembly (4).
Illustration 9 g01203363
Install bolt (3) to pin assembly (4).
Illustration 10 g01202290
Position O-ring seals (2) from the flanges of bucket (1) into the pin joint.
Caterpillar parts catalog:
Parts deflector Caterpillar catalog:
3136839
DEFLECTOR AS
784C, 785C, 785D
784C, 785C, 785D
3638763
DEFLECTOR-MUD
784C, 785C
784C, 785C
1475373
DEFLECTOR
D350E II, D400E II
D350E II, D400E II
1420513
DEFLECTOR
D350E II, D400E II
D350E II, D400E II
1453192
DEFLECTOR
773D, 775D
773D, 775D
1892045
DEFLECTOR
735, 740
735, 740
1892909
DEFLECTOR
725, 725C, 730, 730C
725, 725C, 730, 730C
1853794
DEFLECTOR
725, 725C, 730, 730C
725, 725C, 730, 730C
1743637
DEFLECTOR-MUD
D400E II
D400E II
2730203
DEFLECTOR-MUD
793C, 793D, 793F, 793F AC, 793F CMD, 793F-XQ
793C, 793D, 793F, 793F AC, 793F CMD, 793F-XQ
2970132
DEFLECTOR
793C, 793D
793C, 793D