DEFLECTOR 3892888 - Caterpillar

Removal Procedure
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Turn the fuel shutoff valve to the OFF position.
Illustration 1 g03421516
Disconnect the harness assembly and remove filtered fuel pressure sensor (1).
Disconnect the harness assembly and remove fuel pressure sensor (2).
Remove the O-ring seals.Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 369-9451 Grease -
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Install fuel pressure sensor (1) and fuel pressure sensor (2) in the reverse order of removal.
Tighten fuel pressure sensor (1) and fuel pressure sensor (2) to a torque of 10 2 N m (89 18 lb in).