DEFLECTOR-OIL 4L2041 - Caterpillar

Installation Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     8S-7611     Tube Assembly     2    
8S-7615 Pin     2    
8S-7640 Stand     2    
B     183-4797     Track Roller Lifting Fork     1    Note: There is a track guide on each side of the machine. The procedure that follows is for the removal of the track roller with the track guide.
Illustration 1 g00908316
Fasten a suitable lifting device and a lifting sling to Tooling (B) .
Use Tooling (B) in order to position roller (3). The weight of the track roller is approximately 45 kg (100 lb).
Illustration 2 g00908315
Tighten bolts (4) to a torque of 530 70 N m (391 52 lb ft).
Illustration 3 g00908314
Attach a suitable lifting device to the track guide. The weight of the track guide is approximately 75 kg (165 lb). Position the track guide.
Illustration 4 g00908313
Install bolts (1) that hold the track guide to the undercarriage.Note: Do not remove bolts (1) at this time.
Install bolts (2). Tighten bolts (2) to a torque of 570 80 N m (420 60 lb ft).
Tighten bolts (1) to a torque of 570 80 N m (420 60 lb ft).
Illustration 5 g00489826
Lift the side of the machine. Remove Tooling (A) from the undercarriage.
Adjust the tension on the track assembly. Refer to Operation and Maintenance Manual, "Track Adjustment - Adjust" for more information.