AVSPARE.COM
parts catalog

DETECTOR GP-OIL MIST 2500816 - Caterpillar



2500816 DETECTOR GP-OIL MIST Caterpillar parts 3606 DETECTOR
Rating:
19
Alternative (cross code) number:
CA2500816
250-0816
2500816
Caterpillar 2500816 DETECTOR GP-OIL MIST

Buy DETECTOR GP-OIL MIST 2500816 Caterpillar genuine, new aftermarket tractor parts with delivery
MARINE ENGINE,

Compatible equipment models: 2500816:

MARINE ENGINE  3606   Caterpillar
  For full view, you need register

Information:

Installing the Work Tool
Improper attachment of work tools could result in injury or death.Do not operate this machine until you have positive indication that the coupler pins are fully engaged. Check for engagement by:
Position the work tool on the ground.
Apply slight down pressure on the work tool.
Retract and extend the stick cylinder in order to push the work tool against the ground. Visually confirm that there is no movement between the coupler and the work tool.
For specific information on your host machine, refer to the Operation and Maintenance Manual of your host machine.
Note: Before you install the work tool, inspect the mounting bracket for any wear or for any damage. Refer to Operation and Maintenance Manual, "Frame Mounting Bracket - Inspect" for additional information.Note: When you operate this work tool, a Polycarbonate window is required on the host machine. Consult your Cat dealer for complete information on available kits. Debris Barrier Kits are highly recommended for the mulching applications.
Position the work tool on a level surface. Move the hydraulic lines for the work tool away from the mounting bracket.
Align the mounting bracket for the work tool with the machine linkage.
Install the pivot pins.
Install the over center pins.Note: Ensure that the quick-connects are free from dirt. Failure to keep the quick-connects clean could result in damage to hydraulic system components.Note: It is necessary to release the hydraulic system pressure of the host machine before you connect the hydraulic lines of the work tool to the machine. Refer to the Operation and Maintenance Manual of the host machine for details.
Illustration 1 g06191651
Ensure that the quick connect couplers for the hydraulic hoses are clean on both the work tool and the machine.Connect the hydraulic quick connect couplers as follows:
On a 308E2 machine:
a. Connect the case drain and the return line to the quick connect couplers on the right side of the machine stick when viewed from the operation station.b. Connect the pressure line to the quick connect coupler on the left side of the machine stick when viewed from the operator station.
On a 305E2 or 305.5E2 machine:
a. Connect the case drain and the pressure line to the quick connect couplers on the right side of the machine stick when viewed from the operation station.b. Connect the return line to the quick connect coupler on the left side of the machine stick when viewed from the operator station.
Use the following procedure to verify engagement of the coupler pins.
Enter the machine.
Close the cab door.
Fasten the seat belt.
Move the hydraulic lockout control (lever) to the LOCKED position.
Move the joystick to the HOLD position.
Start the engine.
Keep the work tool close to the ground.
Activate the tilt control in order to tilt the work tool downward.
Apply downward pressure on the work tool.
Move the machine backward slowly. Ensure that there is no movement between the work tool and the quick coupler assembly.
Test the work tool for leaks and for proper operation.Removing the Work Tool
Disengaging the coupler pins will release the work tool from control of the operator.Serious injury or

Caterpillar SIS machinery equipment:

Caterpillar SIS


Parts detector Caterpillar catalog:

4P9191 DETECTOR GP-LIQUID
3126, 3606, 3608, 3612, 3616, C280-12, C280-16, C280-6, C280-8
1210597 DETECTOR GP-LIQUID
3606, 3608, 3612, 3616, C280-12, C280-16, C280-6, C280-8
1916505 DETECTOR GP-OIL MIST
3516B, 3516C, 3606, 3608, 3612, 3616, C280-12, C280-16, C280-6, C280-8
4P9190 DETECTOR GP-LIQUID
3606, 3608, 3612, 3616
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.