AVSPARE.COM
parts catalog

DETECTOR GP-OIL MIST 4416051 - Caterpillar



4416051 DETECTOR GP-OIL MIST Caterpillar parts 3608, C280-8 DETECTOR
Rating:
42
Alternative (cross code) number:
CA4416051
441-6051
4416051
Caterpillar 4416051 DETECTOR GP-OIL MIST

Buy DETECTOR GP-OIL MIST 4416051 Caterpillar genuine, new aftermarket tractor parts with delivery
MARINE ENGINE,

Compatible equipment models: 4416051:

MARINE ENGINE  3608   C280-8   Caterpillar
Number on catalog scheme:
 
  For full view, you need register

Information:


Illustration 75 g06177036
For peripherals check select "Dashboard" tab.
View the "Peripherals" and "Logging" sections. Green indicators represent no fault has been reported. Red Indicators represent a fault has been reported.Note: If a vibration motor is not installed, the vibration motor indicator will be shown as Green.
Illustration 76 g06177037
Confirm the IR Illuminators are working and aligned correctly. A dull red glow will be visible as shown in Illustration 76.
Illustration 77 g06177040
Now to check network connection select "Data Uploader" tab. Confirm that the Network Connected indicator in the "Status" section is green. When the DSS Highway has communications with the server, the Network Connected indicator will be green. The Network Connected indicator will be red when the DSS Highway is not connected to the server.
Confirm that Network Found written in green, is shown in the "Uploads" section. When the DSS Highway has communications with the server, Network Found will be displayed in green. Successful in green will be shown after each successful event upload to the database. Network Lost will be shown in red when the DSS Highway is not able to contact with the server.
Illustration 78 g06177043
For field of view confirmation, select the "Diagnostics" tab.
Illustration 79 g06177047
Inspect the horizontal location of the head. The head should be horizontally center of the screen whilst sitting in the operators seat. The camera can be secured by tightening the screws attaching the bracket to the dashboard.
Inspect the vertical location of the head when:
The seat is at its lowest point.
The seat is at its highest point.
The facial features (eyes and mouth) must be within the field of view of the camera in all seat heights.
Illustration 80 g06177049
The camera can be secured by aligning the bracket holes with the camera screw holes.
Illustration 81 g06177052
For Pitch and Yaw confirmation, select "Diagnostics" tab.Note: The Pitch and Yaw graphs can be viewed in the "Head Tracking Tab" as shown in Illustration 81.
Inspect the Pitch graph in the "Rotation" section. This graph shows the Pitch of the head. Whilst sitting in a normal driving position, looking forward, the green line on the graph should be close to the center line (0). If the green line is not close to the center line, the Pitch will require adjusting in the configuration file.
Inspect the Yaw graph in the "Rotation" section. This graph shows the Yaw of the head. Whilst sitting in a normal driving position, looking forward, the green line on the graph should be close to the center line (0). If the green line is not close to the center line, the Yaw will require adjusting in the configuration file.
Now check for demonstration events. Demonstration (demo) events are created to ensure that required checks can be conducted. The demo event will provide:
Confirmation events are being uploaded to the database.
Confirmation of the driver facing camera alignment.
Confirmation of the driver facing camera vision quality.
System component status.Data is being assigned to the correct vehicle.
Illustration 82 g06177054
Illustration 83 g06177060
For checking demo events select "Dashboard" tab.
Illustration 84 g06177063
Select the "Demo Mode" check box.
Illustration 85 g06177066
Select the "Diagnostics" tab. The image from the driver facing camera will

Caterpillar SIS machinery equipment:

Caterpillar SIS


Parts detector Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.